MBRB2535CT Datasheet, PDF (1/2 Pages) General Semiconductor – SCHOTTKY RECTIFIER

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
MBRB2535CT THRU MBRB2560CT
SCHOTTKY RECTIFIER
Reverse Voltage - 35 to 60 Volts Forward Current - 30.0 Amperes
0.320 (8.13)
0.360 (9.14)
SEATING _-T-
PLATE
0.095 (2.41)
0.100 (2.54)
TO-263AB
0.380 (9.65)
0.420 (10.67)
0.245 (6.22)
MIN
K
1K2
0.575 (14.60)
0.625 (15.88)
0.090 (2.29)
0.110 (2.79)
0.027 (0.686)
0.037 (0.940)
0.160 (4.06)
0.190 (4.83)
0.045 (1.14)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.018 (0.46)
0.025 (0.64)
0.080 (2.03)
0.110 (2.79)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Dual rectifier construction, positive center-tap
♦ Metal silicon junction,
majority carrier conduction
♦ Low power loss,
high efficiency
♦ High current capability, low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering in accordance with
CECC 802 / Reflow guaranteed
MECHANICAL DATA
PIN 1
PIN 2
K - HEATSINK
Dimensions in inches and (millimeters)
Case: JEDEC TO-263AB molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS MBRB2535CT MBRB2545CT MBRB2550CT MBRB2560CT UNITS
Maximum repetitive peak reverse voltage
VRRM
35
Maximum working peak reverse voltage
VRWM
35
Maximum DC blocking voltage
VDC
35
Maximum average forward rectified current at TC=130°C
I(AV)
Peak repetitive forward current per leg at TC=130°C
(rated VR, square wave, 20 KHZ)
IFRM
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
45
50
45
50
45
50
30.0
30.0
150.0
60
Volts
60
Volts
60
Volts
Amps
Amps
Amps
Peak repetitive reverse surge current (NOTE 1)
Maximum instantaneous forward voltage IF=15.0A,TC=25°C
per leg at: (NOTE 2)
IF=15.0A,TC=25°C
IF= 30A, TC=25°C
IF= 30A, TC=125°C
Maximum instantaneous reverse current at
rated DC blocking voltage per leg (NOTE 2)
TC=25°C
TC=125°C
Maximum thermal resistance (NOTE 3)
Voltage rate of change (rated VR)
Operating junction temperature range
Storage temperature range
IRRM
VF
IR
RΘJC
dv/dt
TJ
TSTG
1.0
-
-
0.82
0.73
0.2
40.0
1.5
10,000
-65 to +150
-65 to +175
0.5
0.75
0.65
-
-
1.0
50.0
Amps
Volts
mA
°C/W
V/µs
°C
°C
NOTES: (1) 2.0µs pulse width, f=1.0 KHZ
(2) Pulse test: 300µs pulse width, 1% duty cycle
(3) Thermal resistance from junction to case per leg
4/98