MBR2535CT Datasheet, PDF (1/2 Pages) Motorola, Inc – SWITCHMODE™ Power Rectifiers

MBR2535CT THRU MBR2560CT
SCHOTTKY RECTIFIER
Reverse Voltage - 35 to 60 Volts Forward Current - 30.0 Amperes
TO-220AB
160 (4.06)
140 (3.56)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
0.148 (3.74)DIA.
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1
23
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
0.022 (0.56)
0.014 (0.35)
0.205 (5.20)
0.195 (4.95)
PIN 1
PIN 3
Dimensions in inches and (millimeters)
PIN 2
CASE
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Dual rectifier construction, positive center-tap
♦ Metal silicon junction,
majority carrier conduction
♦ Low power loss,
high efficiency
♦ High current capability, low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS MBR2535CT MBR2545CT MBR2550CT MBR2560CT
Maximum repetitive peak reverse voltage
VRRM
35
45
50
60
Maximum working peak reverse voltage
Maximum DC blocking voltage
VRWM
35
45
50
60
VDC
35
45
50
60
Maximum average forward rectified current at TC=130°C
Peak repetitive forward current per leg at TC=130°C
(rated VR, square wave, 20 KHZ)
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
I(AV)
IFRM
IFSM
30.0
30.0
150.0
Peak repetitive reverse surge current (NOTE 1)
IRRM
1.0
0.5
Maximum instantaneous forward voltage IF=15.0A,TC=25°C
per leg at: (NOTE 2)
IF=15.0A,TC=25°C
IF= 30A, TC=25°C
IF= 30A, TC=125°C
Maximum instantaneous reverse current at
rated DC blocking voltage per leg (NOTE 2)
TC=25°C
TC=125°C
Maximum thermal resistance (NOTE 3)
Voltage rate of change (rated VR)
VF
IR
RΘJC
dv/dt
-
-
0.82
0.73
0.2
40.0
1.5
10,000
0.75
0.65
-
-
1.0
50.0
Operating junction temperature range
Storage temperature range
NOTES:
(1) 2.0µs pulse width, f=1.0 KHZ
(2) Pulse test: 300µs pulse width, 1% duty cycle
(3) Thermal resistance from junction to case per leg
TJ
TSTG
-65 to +150
-65 to +175
UNITS
Volts
Volts
Volts
Amps
Amps
Amps
Amps
Volts
mA
°C/W
V/µs
°C
°C
4/98