MBR1035 Datasheet, PDF (1/2 Pages) Motorola, Inc – SCHOTTKY BARRIER RECTIFIERS 10 AMPERES 20 to 45 VOLTS

MBR1035 THRU MBR1060
SCHOTTKY RECTIFIER
Reverse Voltage - 35 to 60 Volts Forward Current - 10.0 Amperes
0.160 (4.06)
0.140 (3.56)
TO-220AC
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
0.148 (3.74)DIA.
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1
2
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.36)
PIN 1
PIN 2
Dimensions in inches and (millimeters)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
CASE
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classifications 94V-0
♦ Metal silicon junction, majority carrier conduction
♦ Low power loss, high efficiency
♦ High current capability,
low forward voltage drop
♦ High surge capability
♦ For use in low voltage, high frequency inverters,
free wheeling, and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
MECHANICAL DATA
Case: JEDEC TO-220AC molded plastic body
Terminals: Leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounces, 1.81 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current
(SEE FIG. 1)
Peak repetitive forward current at TC=135°C
(square wave 20 KHZ)
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Peak repetitive reverse surge current (NOTE 1)
Voltage rate of change (rated VR)
Maximum instantaneous
forward voltage at (NOTE 2)
IF=10A, TC=25°C
IF=10A, TC=125°C
IF=20A, TC=25°C
IF=20A, TC=125°C
Maximum instantaneous reverse current at rated
DC blocking voltage
TC= 25°C
(NOTE 2) TC=125°C
Maximum thermal resistance, junction to case
Operating junction temperature range
Storage temperature range
NOTES:
(1) 2.0µs pulse width, f=1.0 KHZ
(2) Pulse test: 300µs pulse width, 1% duty cycle
SYMBOLS
VRRM
VRWM
VDC
I(AV)
IFRM
IFSM
IRRM
dv/dt
VF
IR
RΘJC
TJ
TSTG
MBR1035
35
35
35
MBR1045
45
45
45
MBR1050
50
50
50
10.0
20.0
MBR1060
60
60
60
150.0
1.0
0.5
10,000
-
0.80
0.57
0.70
0.84
0.95
0.72
0.85
0.10
15.0
2.0
-65 to +150
-65 to +175
UNITS
Volts
Volts
Volts
Amps
Amps
Amps
Amps
Vµs
Volts
mA
°C/W
°C
°C
4/98