MB2S Datasheet, PDF (1/2 Pages) General Semiconductor – MINIATURE GLASS PASSIVATED SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER

PATENT PENDING
PATENT PENDING
PATENT PENDING
MB2S THRU MB6S
MINIATURE GLASS PASSIVATED SINGLE-PHASE SURFACE MOUNT
BRIDGE RECTIFIER
Reverse Voltage - 200 to 600 Volts Forward Current - 0.5 Ampere
0.029 (0.74)
0.017 (0.43)
TO-269AA
0.161 (4.10)
0.144 (3.65)
0.272 (6.90)
0.252 (6.40)
0.114 (2.90) ^{0.106 (2.70)}
0.094 (2.40) ^{0.090 (2.30)}
0.105 (2.67)
0.095 (2.41)
0.195 (4.95)
0.179 (4.55)
0-8^o
0.038 (0.96)
0.019 (0.48)
0.0075 (0.19)
0.0065 (0.16)
0.205 (5.21)
0.195 (4.95)
0.008 (0.20)
0.004 (0.10)
0.117 (2.97)
0.107 (2.72)
0.058 (1.47)
0.054 (1.37)
0.049 (1.24)
0.039 (0.99)
0.062 (1.57)
0.058 (1.47)
0.016 (0.41)
0.006 (0.15)
0.018 (0.46)
0.014 (0.36)
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ This series is UL recognized under Component Index,
file number E54214
♦ Glass passivated chip junctions
♦ High surge overload rating: 35A peak
♦ Saves space on printed circuit boards
♦ High temperature soldering guaranteed:
260°C/10 seconds at 5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols marked on body
Mounting Position: Any
Weight: 0.0078 ounce, 0.22 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
MB2S
MB4S
Device marking code
2
4
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified
current at TA=30°C
- on glass-epoxy P.C.B. (NOTE 1)
- on aluminum substrate (NOTE 2)
Peak forward surge current 8.3msec single half sine-
wave superimposed on rated load (JEDEC Method)
VRRM
VRMS
VDC
I(AV)
IFSM
200
400
140
280
200
400
0.5
0.8
35.0
Rating for fusing (t<8.3ms)
I²t
5.0
Maximum instantaneous forward voltage drop
per leg at 0.4A
VF
1.0
Maximum DC reverse current at
rated DC blocking voltage per leg
TA=25°C
TA=125°C
Typical junction capacitance per leg (NOTE 3)
Typical thermal resistance per leg
(NOTE 1)
(NOTE 2)
(NOTE 1)
Operating junction and storage temperature range
IR
CJ
RΘJA
RΘJA
RΘJL
TJ, TSTG
5.0
100
13.0
85.0
70.0
20.0
-55 to +150
NOTES:
(1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads
(2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad
(3) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
MB6S
6
600
420
600
UNITS
Volts
Volts
Volts
Amp
Amps
A²sec
Volts
µA
pF
°C/W
°C
4/98