LL15 Datasheet, PDF (1/4 Pages) General Semiconductor – Voltage Stabilizers

LL1.5 THRU LL2.4
Voltage Stabilizers
MiniMELF
Cathode Mark
.142 (3.6)
.134 (3.4)
.019 (0.48)
.011 (0.28)
Dimensions in inches and (millimeters)
FEATURES
♦ Silicon Planar Stabilizer Diodes
♦ Monolithic integrated analog circuits in Min-
iMELF case, designed for small power stabi-
lizer and limitation circuits, providing low dynamic
resistance and high-quality
stabilization performance as well as low noise. In the
reverse direction, these devices show the behavior
of forward-biased silicon diodes.
♦ _{The end of the device marked with the cathode ring}
is to be connected:
LL1.5 and LL2 to the negative pole of the supply voltage
LL 2.4 to the positive pole of the supply voltage
♦ These diodes are also available in DO-35 case
with the type designation ZTE1.5 … ZTE2.4.
MECHANICAL DATA
Case: MiniMELF Glass Case (SOD-80)
Weight: approx. 0.05 g
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 °C ambient temperature unless otherwise specified
Symbol
Operating Current see Table “Characteristics”
Inverse Current
I_F
Power Dissipation at T_amb = 25 °C
P_tot
Junction Temperature
T_j
Storage Temperature Range
T_S
1) _{Valid provided that electrodes are kept at ambient temperature.}
Value
Unit
100
mA
300¹⁾
mW
150
°C
–55 to +150
°C
4/98