GP20A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

GP20A THRU GP20J
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Amperes
*
Case Style GP20
TED
TEN
PA
0.210 (5.3)
1.0 (25.4)
MIN.
0.190 (4.8)
DIA.
0.375 (9.5)
0.285 (7.2)
0.042 (1.07)
0.037 (0.94)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
FEATURES
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ 2.0 Ampere operation at TA= 55°C with no thermal
runaway
♦ Typical IR less than 0.1µA
♦ High temperature soldering guaranteed:
350°C/10 seconds 0.375" (9.5mm) lead length,
5 lbs.(2.3kg) tension
MECHANICAL DATA
Case: Molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Band denotes cathode end
Mounting Position: Any
Weight: 0.03 ounce, 0.8 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 2.0A
Maximum reverse current
at rated DC blocking voltage
Maximum full load reverse current, full cycle
average 0 375" (9.5mm) lead length at TA=55°C
Typical reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
GP
GP
SYMBOLS
20A
20B
VRRM
50
100
VRMS
35
70
VDC
50
100
I(AV)
GP
GP
20D
20G
200 400
140 280
200 400
2.0
GP
20J
UNITS
600 Volts
420 Volts
600 Volts
Amps
IFSM
VF
IR
IR(AV)
trr
CJ
RΘJA
RΘJL
TJ, TSTG
65.0
1.2
1.1
5.0
100.0
2.5
40.0
25.0
10.0
-65 to +175
Amps
Volts
µA
µA
µs
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length P.C.B. mounted
4/98