GIB2401 Datasheet, PDF (1/2 Pages) General Semiconductor – GLASS PASSIVATED PLASTIC RECTIFIER

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
GIB2401 THRU GIB2404
GLASS PASSIVATED PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts Forward Current - 16.0 Amperes
0.320 (8.13)
0.360 (9.14)
SEATING _-T-
PLATE
0.095 (2.41)
0.100 (2.54)
TO-263AB
0.380 (9.65)
0.420 (10.67)
0.245 (6.22)
MIN
K
1K2
0.575 (14.60)
0.625 (15.88)
0.160 (4.06)
0.190 (4.83)
0.045 (1.14)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.027 (0.686)
0.037 (0.940)
0.090 (2.29)
0.110 (2.79)
0.018 (0.46)
0.025 (0.64)
0.080 (2.03)
0.110 (2.79)
PIN 1
PIN 2
K - HEATSINK
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Dual rectifier construction, positive centertap
♦ Glass passivated chip junctions
♦ Low power loss
♦ High surge capability
♦ Superfast recovery times for high efficiency
♦ High temperature soldering in accordance with
CECC 802 / Reflow guaranteed
MECHANICAL DATA
Case: JEDEC TO-263AB molded plastic body
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
R. atings at 25°C ambient temperature unless otherwise specified.
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TC=125°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TC=125°C
Maximum instantaneous forward voltage per leg at:
IF=4A, TJ=25°C
IF=8A, TJ=25°C
IF=4A, TJ=100°C
IF=8A, TJ=100°C
Maximum DC reverse current
at rated DC blocking voltage
TC=25°C
TC=100°C
Maximum reverse recovery time per leg (NOTE1)
Typical junction capacitance per leg (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to case per leg mounted on heatsink
SYMBOLS
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR
trr
CJ
RΘJC
TJ, TSTG
GIB2401
50
35
50
GIB2402
100
70
100
GIB2403
150
105
150
16.0
GIB2404
200
140
200
125.0
0.975
0.900
0.800
0.895
50.0
150.0
35.0
85.0
2.2
-65 to +150
5.0
500.0
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
µA
ns
pF
°C/W
°C
4/98