GBL005 Datasheet, PDF (1/2 Pages) Won-Top Electronics – 4.0A GLASS PASSIVATED BRIDGE RECTIFIER

GBL005 THRU GBL10
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 4.0 Amperes
0.125 (3.17)
x 45 degrees
Chamfer
Case Type GBL
0.825 (20.9)
0.815 (20.7)
0.080 (2.03)
0.060 (1.50)
0.421 (10.7)
0.411 (10.4)
0.095 (2.41)
0.080 (2.03)
0.098 (2.5)
0.075 (1.9)
0.050 (1.27)
0.040 (1.02)
0.098 (2.5)
0.075 (1.9)
0.718 (18.2)
0.682 (17.3)
Lead Depth
0.022 (0.56)
0.018 (0.46)
0.040 (1.02)
0.030 (0.76)
0.210 (5.3)
0.190 (4.8)
0.022 (0.56)
0.018 (0.46)
0.140 (3.56)
0.128 (3.25)
Polarity shown on front side of case: positive lead by beveled corner
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ This series is UL listed under the Recognized Component
Index, file number E54214
♦ Glass passivated chip junctions
♦ High case dielectric strength
♦ Typical IR less than 0.1µA
♦ High surge current capability
♦ Ideal for printed circuit boards
♦ High temperature soldering guaranteed:
260°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Mounting Position: Any
Weight: 0.071 ounce, 2.0 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
GBL
005
GBL
01
GBL
02
GBL
04
GBL
06
GBL
08
GBL
10 UNITS
Maximum repetitive peak reverse voltage
VRRM
50 100 200 400
600 800 1000 Volts
Maximum RMS voltage
VRMS
35
70 140 280
420 560 700 Volts
Maximum DC blocking voltage
VDC
50 100 200 400
600 800 1000 Volts
Maximum average forward
rectified output current at
TC=50°C (NOTE 1)
TA=40°C (NOTE 2)
I(AV)
4.0
3.0
Amps
Peak forward surge current, single half sine-wave
superimposed on rated load (JEDEC Method) TJ=150°C ^IFSM
150.0
Amps
Rating for fusing (t<8.3ms)
I²t
93.0
A²sec
Maximum instantaneous forward drop per leg
at 4.0 Amperes
VF
1.1
Volts
Maximum DC reverse current at rated
DC blocking voltage per leg
TA=25°C
TA=125°C
IR
5.0
500.0
µA
Typical junction capacitance per leg
(NOTE 3)
CJ
95.0
40.0
pF
Typical thermal resistance per leg
(NOTE 1)
(NOTE 2)
RΘJA
RΘJL
22.0
3.5
°C/W
Operating junction storage and temperature range
TJ, TSTG
-55 to +150
°C
NOTES:
(1) Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3cm) Al. plate
(2) Unit mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5" (12 x12mm) copper pads
(3) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
4/98