English
Language : 

G2A Datasheet, PDF (1/2 Pages) General Semiconductor – GLASS PASSIVATED JUNCTION RECTIFIER
G2A THRU G2M
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes
*
DO-204AP
TED
TEN
PA
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.150 (3.8)
0.100 (2.5)
DIA.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
FEATURES
♦ High temperature metallurgically bonded
construction
♦ Glass passivated cavity-free junction
♦ Hermetically sealed package
2.0 Ampere operation
at TA=75°C with no
thermal runaway
♦ Typical IR less than 0.1µA
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS G2A G2B
G2D
G2G
G2J
G2K
Maximum repetitive peak reverse voltage
VRRM
50 100 200 400 600 800
Maximum RMS voltage
VRMS
35 70 140 280 420 560
Maximum DC blocking voltage
VDC
50 100 200 400 600 800
Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=75°C
I(AV)
2.0
Peak forward surge current
8.3ms single half sine-wave superimposed
IFSM
50.0
on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 2.0A
VF
1.2
1.1
Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length at TA=100°C
IR(AV)
100.0
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=150°C
IR
1.0
100.0
Typical reverse recovery time (NOTE 1)
trr
1.5
Typical junction capacitance (NOTE 2)
CJ
15.0
Typical thermal resistance (NOTE 3)
RΘJA
55.0
Operating junction and storage temperature range
TJ, TSTG
-65 to +175
NOTES:
(1) Measured with IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length P.C.B mounted.
G2M
1000
700
1000
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
µA
µA
µs
pF
°C/W
°C
4/98