FES16AT Datasheet, PDF (1/2 Pages) Fairchild Semiconductor – 16 Ampere Glass Passivated Super Fast Rectifiers

FES16AT THRU FES16JT
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 16.0 Amperes
0.160 (4.06)
0.140 (3.56)
TO-220AC
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1
2
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.36)
PIN 1
PIN 2
Dimensions in inches and (millimeters)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated chip junction
♦ Low power loss
♦ Low forward voltage, high current capability
♦ High surge current capability
♦ Superfast recovery time, for high efficiency
♦ High temperature soldering guaranteed:
250°C, 0.16" (4.06mm) from case for 10 seconds
MECHANICAL DATA
Case: JEDEC TO-220AC molded plastic body over
passivated chips
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
CASE
Polarity: As marked
Mounting Position: Any
Weight: 0.064 ounce, 1.81 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TC=100°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TC=100°C
Maximum instantaneous forward voltage at 16A
Maximum DC reverse current
at rated DC blocking voltage
TC=25°C
TC=100°C
Maximum reverse recovery time (NOTE1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating and storage temperature range
FES
SYMBOLS 16AT
VRRM 50
VRMS 35
VDC 50
FES
16BT
100
70
100
FES
16CT
150
105
150
FES
16DT
200
140
200
FES
16FT
300
210
300
FES FES
16GT 16HT
400 500
280 350
400 500
FES
16JT UNITS
600 Volts
420 Volts
600 Volts
I(AV)
16.0
Amps
IFSM
VF
IR
trr
CJ
RΘJA
RΘJC
TJ, TSTG
250.0
Amps
0.975
35.0
1.3
10.0
500.0
175.0
16.0
1.2
-65 to +150
1.5
50.0
145.0
Volts
µA
ns
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr =0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to case and ambient mounted on heatsink
4/98