FEPB16AT Datasheet, PDF (1/2 Pages) General Semiconductor – FAST EFFICIENT PLASTIC RECTIFIER

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
FEPB16AT THRU FEPB16JT
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 16.0 Amperes
0.320 (8.13)
0.360 (9.14)
SEATING _-T-
PLATE
0.095 (2.41)
0.100 (2.54)
0.380 (9.65)
0.420 (10.67)
0.245 (6.22)
MIN
K
TO-263AB
1K2
0.575 (14.60)
0.625 (15.88)
0.090 (2.29)
0.110 (2.79)
0.027 (0.686)
0.037 (0.940)
PIN 1
PIN 2
K - HEATSINK
0.160 (4.06)
0.190 (4.83)
0.045 (1.14)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.018 (0.46)
0.025 (0.64)
0.080 (2.03)
0.110 (2.79)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Dual rectifier construction, positive centertap
♦ Glass passivated chip junctions
♦ Low power loss
♦ Low forward voltage, high current capability
♦ High surge current capability
♦ Superfast recovery times for high efficiency
♦ High temperature soldering in accordance with
CECC 802 / Reflow guaranteed
MECHANICAL DATA
Case: JEDEC TO-263AB molded plastic body
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight: 0.08 ounce, 2.24 grams
Dimensions are in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
FEPB
SYMBOLS 16AT
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TC=100°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TC=100°C per leg
Maximum instantaneous forward voltage per leg
at 8.0A
VRRM 50
VRMS 35
VDC
50
I(AV)
IFSM
VF
Maximum DC reverse current
at rated DC blocking voltage per leg
TC=25°C
TC=100°C
IR
Maximum reverse recovery time (NOTE 1)
per leg
trr
Typical Junction Capacitance per leg (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
CJ
RΘJC
TJ, TSTG
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to case per leg mounted on heatsink
FEPB
16BT
100
70
100
FEPB FEPB
16CT 16DT
150 200
105 140
150 200
FEPB FEPB
16FT 16GT
300 400
210 280
300 400
FEPB
16HT
500
350
500
FEPB
16JT UNITS
600 Volts
420 Volts
600 Volts
16.0
Amps
200.0
Amps
0.95
1.3
10.0
500.0
35.0
50.0
85.0
2.2
-55 to +150
1.5
Volts
µA
ns
60.0
pF
°C/W
°C
4/98