DF005M Datasheet, PDF (1/2 Pages) Semtech Corporation – MINIATURE GLASS PASSIVATED SINGLE - PHASE - RECTIFIER

DF005M THRU DF10M
MINIATURE GLASS PASSIVATED SINGLE-PHASE-BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
Case Style DFM
0.255 (6.5) 0.315 (8.00)
0.245 (6.2) 0.285 (7.24)
0.130 (3.3)
0.120 (3.05)
0.045 (1.14)
0.035 (0.89)
0.023 (0.58)
0.018 (0.46)
0.335 (8.51)
0.320 (8.12)
0.205 (5.2)
0.195 (5.0)
0.080 (2.03)
0.050 (1.27)
0.185 (4.69)
0.150 (3.81)
0.075 (1.90)
0.055 (1.39)
0.013 (3.3)
0.0086 (0.22)
0.350 (8.9)
0.300 (7.6)
Dimensions in inches and (millimeters)
FEATURES
♦ This series is UL listed under the Recognized Component
Index, file number E54214
♦ Plastic package used has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated chip junctions
♦ Surge overload rating of 50 Amperes peak
♦ Ideal for printed circuit boards
♦ High temperature soldering guaranteed:
260°C/10 seconds at 5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Molded plastic body over passivated junctions
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols marked on body
Mounting Position: Any
Weight: 0.04 ounce, 1.0 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
DF
DF
DF
DF
DF
SYMBOLS 005M 01M
02M
04M 06M
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward output rectified current
at TA=40°C
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
VRRM 50 100 200 400 600
VRMS 35
70 140 280 420
VDC
50 100 200 400 600
I(AV)
1.0
IFSM
50.0
Rating for fusing (t < 8.3ms)
I²t
10.0
Maximum instantaneous forward voltage drop
per leg at 1.0A
VF
1.1
Maximum reverse current
at rated DC blocking voltage per leg
Typical junction capacitance per leg (NOTE 1)
Typical thermal resistance per leg (NOTE 2)
TA=25°C
TA=125°C
Operating junction and storage temperature range
IR
CJ
RΘJA
RΘJL
TJ, TSTG
5.0
500.0
25.0
40.0
15.0
-55 to +150
DF DF
08M 10M UNITS
800 1000 Volts
560 700 Volts
800 1000 Volts
Amp
Amps
A²sec
Volts
µA
pF
°C/W
°C
NOTES:
(1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Thermal resistance from junction to ambient and from junction to lead mounted on
P.C.B. with 0.5 x 0.5" (13 x 13mm) copper pads
4/98