BYW29-50 Datasheet, PDF (1/2 Pages) General Semiconductor – FAST EFFICIENT PLASTIC RECTIFIER

BYW29-50 THRU BYW29-200
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts Forward Current - 8.0 Amperes
0.160 (4.06)
0.140 (3.56)
TO-220AC
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1
2
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.36)
PIN 1
PIN 2
Dimensions in inches and (millimeters)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14
0.530 (13.
0.110 (2.79)
0.100 (2.54)
CASE
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated chip junction
♦ Low power loss
♦ Low leakage current
♦ High surge current capability
♦ Superfast recovery time for high efficiency
♦ High temperature soldering guaranteed:
250°C, 0.16” (4.06mm) from case for 10 seconds
MECHANICAL DATA
Case: JEDEC TO-220AC molded plastic body over
passivated chip
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight: 0.064 ounce, 1.81 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current at TC=125°C
Peak forward surge current 10ms
single half sine-wave superimposed at TJ=150°C
Maximum instantaneous forward voltage at:IF=20A, TJ=25°C
IF=8A, TJ=150°C
Maximum DC reverse current
at rated DC blocking voltage
TC=25°C
TC=100°C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Maximum thermal resistance (NOTE 3)
(NOTE 4)
Operating and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
BYW29-50
50
35
50
BYW29-100 BYW29-150
100
150
70
105
100
150
8.0
BYW29-200
200
140
200
UNITS
Volts
Volts
Volts
Amps
IFSM
100.0
Amps
VF
IR
trr
CJ
RΘJA
RΘJC
TJ, TSTG
1.3
0.8
10.0
500.0
25.0
45.0
20.0
3.0
-65 to +150
Volts
µA
ns
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=1A, VR=30V, di/dt=100A/µs, Irr=10%, IRM for measurement of trr
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient in free air; no heatsink
(4) Thermal resistance from junction to case mounted on heatsink
4/98