BYV95 Datasheet, PDF (1/2 Pages) NXP Semiconductors – Fast soft-recovery controlled avalanche rectifiers

BYV95 AND BYV96 SERIES
MINIATURE GLASS PASSIVATED FAST SWITCHING RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 1.5 Amperes
TED*
DO-204AP
PATEN
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.150 (3.8)
0.100 (2.5)
DIA.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
FEATURES
♦ High temperature metallurgically bonded
construction
♦ Hermetically sealed package
♦ Glass passivated cavity-free junction
♦ 1.5 Ampere operation
at TA=55°C with no
thermal runaway
♦ Typical IR less than 0.1µA
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum recurrent peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Minimum avalanche breakdown voltage at 100µA
Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=55°C
Peak forward surge current, 10ms single half sine-
wave superimposed on rated load at TJ=165°C
Maximum instantaneous forward
voltage at 1.5A
TJ =25°C
TJ=165°C
Maximum full load reverse current,
full cycle average, 0.375”, (9.5mm) TJ=25°C
lead length at
TJ=165°C
Maximum DC reverse current
at rated DC blocking voltage
SYMBOLS
VRRM
VRMS
VDC
V(BR)
I(AV)
IFSM
VF
IR(AV)
IR
BYV95A
200
140
200
300
BYV95B
400
280
400
500
BYV95C
600
420
600
700
1.5
35.0
1.6
1.35
1.0
150.0
2.0
BYV96D
800
560
800
900
BYV96E
1000
700
1000
1100
Maximum reverse recovery time (NOTE 1)
trr
250
300
Typical junction capacitance (NOTE 2)
CJ
10.0
Typical thermal resistance (NOTE 3)
RΘJA
55.0
Operating junction temperature range
TJ
-65 to +175
Storage temperature range
TSTG
NOTES: (1) Measured with IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted
-65 to +200
UNITS
Volts
Volts
Volts
Volts
Amps
Amps
Volts
µA
µA
ns
pF
°C/W
°C
°C
4/98