BYV32-50 Datasheet, PDF (1/2 Pages) General Semiconductor – FAST EFFICIENT PLASTIC RECTIFIER

BYV32-50 THRU BYV32-200
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 150 Volts Forward Current - 18.0 Amperes
TO-220AB
0.160 (4.06)
0.140 (3.56)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1
2
3
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
0.022 (0.56)
0.014 (0.35)
PIN 1
PIN 3
Dimensions in inches and (millimeters)
PIN 2
CASE
FEATURES
♦ Dual rectifier construction, positive centertap
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated chip junctions
♦ Low power loss
♦ Low forward voltage,
high current capability
♦ High surge capability
♦ Superfast recovery time for high efficiency
♦ High temperature soldering guaranteed:
250°C, 0.16" (4.06mm) from case for 10 seconds
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic body over
passivated chips
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TC=120°C
Peak forward surge current
10ms single half sine-wave superimposed at
at TJ=150°C
Maximum instantaneous forward voltage per leg at:
IF=20A
IF=5.0A, TJ=100°C
Maximum DC reverse current
at rated DC blocking voltage
TC=25°C
TC=100°C
Maximum reverse recovery time per leg (NOTE 1)
Typical junction capacitance per leg (NOTE 2)
Maximum thermal resistance per leg (NOTE 3)
Operating and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
IFSM
VF
IR
trr
CJ
RΘJA
RΘJC
TJ, TSTG
BYV32-50
50
35
50
BYV32-100
100
70
100
BYV32-150
150
105
150
18.0
BYV32-200
200
140
200
UNITS
Volts
Volts
Volts
Amps
150.0
Amps
1.15
0.85
10.0
600.0
25.0
45.0
20.0
3.0
-65 to +150
Volts
µA
ns
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=1A VR=30V, di/dt=100A/µs, Irr=10% IRM
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to case per leg mounted on heatsink
4/98