BYM13-20 Datasheet, PDF (1/2 Pages) General Semiconductor – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

BYM13-20 THRU BYM13-60
SGL41-20 THRU SGL41-60
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 20 to 60 Volts Forward Current - 1.0 Ampere
DO-213AB
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has carries Underwriters Laboratory
Flammability Classifications 94V-0
♦ For surface mounted applications
♦ Metal silicon junction, majority carrier conduction
♦ High surge capability
♦ Low power loss, high efficiency
♦ High current capability, low forward voltage drop
♦ For use in low voltage, high frequency inverters, free
wheeling and polarity protection applications
♦ Guardring for overvoltage protection
♦ High temperature soldering guaranteed:
250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-213AB molded plastic body
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Two bands indicate cathode end 1st band denotes
device type 2nd band denotes voltage type
Mounting Position: Any
Weight: 0.116 gram, 0.0041 ounce
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
Denotes Schottky devices: 1st band is orange
Polarity color bands (2nd band) voltage type
Maximum repetitive peak reverse voltage
VRRM
Maximum RMS voltage
VRMS
Maximum DC blocking voltage
VDC
Maximum average forward rectified current
I(AV)
(SEE FIG. 1)
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
Maximum instantaneous forward voltage at 1.0A
VF
(NOTE 1)
Maximum reverse current
TA=25°C
at rated DC blocking voltage (NOTE 1) TA=100°C
IR
Typical junction capacitance (NOTE 2)
CJ
-20
SGL41-20
Gray
20
14
20
-30
SGL41-30
Red
30
21
30
0.50
10
110
BYM13
-40
SGL41-40
Orange
40
28
40
1.0
30.0
0.5
-50
SGL41-50
Yellow
50
35
50
-60
SGL41-60
Green
60
42
60
0.70
5.0
80.0
Maximum thermal resistance
(NOTE 4)
(NOTE 3)
RΘJA
RΘJT
Operating junction temperature range
TJ
-55 to +125
Storage temperature range
TSTG
NOTES:
(1) Pulse test: 300µs pulse width, 1% duty cycle
(2) Measured at 1 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal
(4) Thermal resistance junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal
75.0
30.0
-55 to +150
-55 to +150
UNITS
Volts
Volts
Volts
Amp
Amps
Volts
mA
pF
°C/W
°C
°C
10/98