BYM12-50 Datasheet, PDF (1/2 Pages) General Semiconductor – SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST EFFICIENT RECTIFIER

BYM12-50 THRU BYM12-400
EGL41A THRU EGL41G
SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST EFFICIENT RECTIFIER
Reverse Voltage - 50 to 400 Volts Forward Current - 1.0 Ampere
* _DO-213AB
TED ^{SOLDERABLE ENDS}
TEN
1st BAND
2cnd BAND
PA
D2
D1=
0.105
0.095
(2.67)
(2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185(4.7)
D2
=
D1
+0
- 0.008
(0.20)
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ Capable of meeting environmental standards of MIL-S-19500
♦ For surface mount applications
♦ High temperature metallurgically bonded construction
♦ Glass passivated cavity-free junction
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
450°C/5 seconds at terminals. Complete device submersible
temperature of 260°C for 10 seconds in solder bath
1st band denotes type and positive end (cathode)
MECHANICAL DATA
Dimensions in inches and (millimeters)
Case: JEDEC DO-213AB molded plastic over glass body
*Glass-plastic encapsulation is covered by
Terminals: Plated terminals, solderable per MIL-STD-750,
Patent No. 3,996,602 and brazed-lead assembly to Patent No. 3,930,306
Method 2026
Polarity: Two bands indicate cathode end -1st band denotes device
type and 2nd band denotes repetitive peak reverse voltage rating
Mounting Position: Any
Weight: 0.116 ounce, 0.0046 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Fast efficient device: 1st band is green
Polarity color bands (2cnd band)
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current at TT=75°C
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Maximum thermal resistance (NOTE 3)
(NOTE 4)
Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
BYM12 BYM12 BYM12 BYM12 BYM12 BYM12
-50
-100
-150
-200
-300
-400 UNITS
EGL41A EGL41B EGL41C EGL41D EGL41F EGL41G
GRAY RED
PINK ORANGE BROWN YELLOW
50 100 150 200 300 400 Volts
35
70
105 140 210 280 Volts
50 100 150 200 300 400 Volts
1.0
Amp
IFSM
30.0
Amps
VF
IR
trr
CJ
RΘJA
RΘJT
TJ, TSTG
1.0
5.0
50.0
50.0
20.0
60.0
30.0
-65 to +175
1.25
14.0
Volts
µA
ns
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal
(4) Thermal resistance from junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal