BYM07-50 Datasheet, PDF (1/2 Pages) General Semiconductor – SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST EFFICIENT RECTIFIER

BYM07-50 THRU BYM07-400
EGL34A THRU EGL34G
SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST EFFICIENT RECTIFIER
Reverse Voltage - 50 to 400 Volts Forward Current - 0.5 Ampere
*
TED
DO-213AA
SOLDERABLE ENDS
TEN
1st BAND
2nd BAND
PA
D2
D1=
0.066
0.060
(1.676)
(1.524)
0.022 (0.559)
0.016 (0.406)
0.145 (3.683)
0.131(3.327)
D2
=
D1
+0
- 0.008
(0.20)
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ Capable of meeting environmental standards of MIL-S-19500
♦ For surface mount applications
♦ High temperature metallurgically bonded construction
♦ Glass passivated cavity-free junction
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
450°C/5 seconds at terminals. Complete device submersible
temperature of 260°C for 10 seconds in solder bath
1st band denotes type and polarity
2cnd band denotes voltage type
MECHANICAL DATA
Dimensions in inches and (millimeters)
Case: JEDEC DO-213AA molded plastic over glass body
*Glass-plastic encapsulation is covered by
Terminals: Plated terminals, solderable per MIL-STD-750,
Patent No. 3,996,602 and brazed-lead assembly to Patent No. 3,930,306
Method 2026
Polarity: Two bands indicate cathode end -1st band denotes device
®
type and 2nd band denotes repetitive peak reverse voltage rating
Mounting Position: Any
Weight: 0.0014 ounce, 0.036 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Fast efficient device: 1st band is Green
Polarity color bands (2nd Band)
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current at TT=75°C
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load (JEDEC Method)
SYMBOLS
VRRM
VRMS
VDC
I(AV)
BYM07
-50
EGL34A
GRAY
50
35
50
IFSM
BYM07 BYM07 BYM07 BYM07 BYM07
-100
-150
-200
-300
-400 UNITS
EGL34B EGL34C EGL34D EGL34F EGL34G
RED
PINK ORANGE BROWN YELLOW
100 150 200 300 400 Volts
70
105 140 210 280 Volts
100 150 200 300 400 Volts
0.5
Amp
10.0
Amps
Maximum instantaneous forward voltage at 0.5A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
Maximum full load reverse current,
full cycle average at TA=55°C
Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Maximum thermal resistance (NOTE 3)
(NOTE 4)
Operating junction and storage temperature range
VF
IR
IR(AV)
trr
CJ
RΘJA
RΘJT
TJ, TSTG
1.25
5.0
50.0
50.0
50.0
7.0
150.0
70.0
-65 to +175
1.35
Volts
µA
µA
ns
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal
(4) Thermal resistance from junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal
4/98