BY396P Datasheet, PDF (1/2 Pages) General Semiconductor – SOFT RECOVER FAST - SWITCHING PLASTIC RECTIFIER

BY396P THRU BY399P
SOFT RECOVER FAST - SWITCHING PLASTIC RECTIFIER
Reverse Voltage - 100 to 800 Volts Forward Current - 3.0 Amperes
DO-201AD
0.210 (5.3)
0.190 (4.8)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ High surge current capability
♦ Construction utilizes void-free
molded plastic technique
♦ 3.0 Ampere operation at
TA=50°C with no thermal runaway
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375” (9.5mm) lead lengths at TA=50°C
Peak forward surge current
10ms single half sine-wave superimposed on
rated load at TA=50°C
Maximum repetitive peak forward surge (NOTE 1)
Maximum instantaneous forward voltage at 3.0A
Maximum DC reverse current
at rated DC blocking voltage
TA= 25°C
TA=100°C
Maximum reverse recovery time (NOTE 2)
Maximum forward recovery time at 100mA, di/d = 50A/µs
Typical junction capacitance (NOTE 3)
Typical thermal resistance (NOTE 4)
Operating junction temperature range
Storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
BY396P
100
70
100
BY397P
200
140
200
BY398P
400
280
400
3.0
IFSM
IFRM
VF
IR
trr
tfr
CJ
RΘJA
TJ
TSTG
100.0
10.0
1.25
10.0
500.0
500.0
1.0
28.0
22.0
-50 to +125
-50 to +150
BY399P
800
560
800
UNITS
Volts
Volts
Volts
Amps
Amps
Amps
Volts
µA
ns
µs
pF
°C/W
°C
°C
NOTES:
(1) Repetitive peak forward surge current at f<15 KHZ
(2) Reverse recovery test conditions: IF=10mA, IR=10mA, Irr=1.0mA
(3) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(4) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length with both leads to heat sink
4/98