1N5624GP Datasheet, PDF (1/2 Pages) General Semiconductor – GLASS PASSIVATED JUNCTION RECTIFIER

1N5624GP THRU 1N5627GP
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 800 Volts Forward Current - 3.0 Amperes
*
TED
PATEN
DO-201AD
0.210 (5.3)
0.190 (4.8)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
FEATURES
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ 3.0 Ampere operation at TA=70°C with no thermal
runaway
♦ Typical IR less than 0.1µA
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length
5 lbs. (2.3kg) tension
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.12 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
R. atings at 25°C ambient temperature unless otherwise specified.
* Maximum repetitive peak reverse voltage
* Maximum DC blocking voltage
* Maximum average forward rectified current
0.375" (9.5mm) lead lengths at TA=70°C
* Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
* Maximum instantaneous forward voltage at 3.0A
Maximum reverse current
at rated DC blocking voltage
Maximum full load reverse current, full cycle
average, 0.375" (9.5mm) lead length at TA=70°C
Typical reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
TA=25°C
TA=70°C
TA=25°C
TA=150°C
SYMBOLS
VRRM
VDC
1N5624GP 1N5625GP
200
400
200
400
1N5626GP 1N5627GP
600
800
600
800
UNITS
Volts
Volts
I(AV)
3.0
Amps
IFSM
VF
IR
IR(AV)
trr
CJ
RΘJA
TJ, TSTG
125.0
300.0
1.0
0.95
5.0
200.0
200.0
3.0
40.0
20.0
-65 to +175
Amps
Volts
µA
µA
µs
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
*JEDEC Values
4/98