1N5624 Datasheet, PDF (1/2 Pages) Powerex Power Semiconductors – Lead Mounted Rectifier

1N5624 THRU 1N5627
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 800 Volts Forward Current - 3.0 Amperes
*
CASE STYLE G3
TED
TEN
PA
0.250 (6.3)
1.0 (25.4)
MIN
0.170 (4.3)
DIA.
0.300 (7.6)
MAX.
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
FEATURES
♦ Glass passivated cavity-free junction
♦ High temperature metallurgically bonded
constructed
♦ Hermetically sealed package
♦ Capable of meeting
environmental
standards of
MIL-S-19500
♦ Typical IR less than 0.1µA
♦ 3.0 Ampere operation at TA=70°C with no thermal
runaway
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
1N5624
1N5625
1N5626
1N5627
*Maximum repetitive peak reverse voltage
Maximum RMS voltage
*Maximum DC blocking voltage
*Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=70°C
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
VRRM
VRMS
VDC
I(AV
IFSM
200
400
600
800
140
280
420
560
200
400
600
800
3.0
125.0
*Maximum instantaneous forward voltage at 3.0A
TA=25°C
TA=70°C
*Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=175°C
*Maximum full load reverse current, full cycle average,
0.375" (9.5mm) lead length at TA=70°C
Typical junction capacitance (NOTE 1)
Typical thermal resistance (NOTE 2)
*Operating junction temperature range
*Storage temperature range
VF
IR
IR(AV)
CJ
RΘJA
RΘJL
TJ
TSTG
1.0
0.95
5.0
300.0
150.0
40.0
20.0
10.0
-65 to +175
-65 to +200
200.0
100.0
NOTES:
(1) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(2) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length,
with both leads attached between heatsinks
*JEDEC registered values
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
µA
µA
pF
°C/W
°C
°C
4/98