1N5615GP Datasheet, PDF (1/2 Pages) General Semiconductor – GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER

1N5615GP THRU 1N5623GP
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0 Ampere
*
TED
TEN
PA
DO-204AC
1.0
(25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
0.300 (7.6)
0.230 (5.8)
1.0
(25.4)
MIN.
0.140 (3.6)
0.104 (2.6)
DIA.
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
FEATURES
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ 1.0 Ampere operation at TA=55°C with no thermal
runaway
♦ High temperature soldering guaranteed:
350°C/10seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
* Maximum repetitive peak reverse voltage
* Maximum RMS voltage
* Maximum DC blocking voltage
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
* Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
*Maximum reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
* Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
1N
5615GP
200
140
200
1N
5617GP
400
280
400
1N
5619GP
600
420
600
1.0
1N
5621GP
800
560
800
1N
5623GP
1000
700
1000
UNITS
Volts
Volts
Amps
Amp
IFSM
VF
IR
trr
CJ
RΘJA
TJ,TSTG
50.0
Amps
1.2
Volts
0.5
25.0
µA
150
250
300
500
ns
25.0
pF
45.0
°C/W
-65 to +175
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
* JEDEC registered values
4/98