1N5615 Datasheet, PDF (1/2 Pages) General Semiconductor – GLASS PASSIVATED FAST SWITCHING RECTIFIER

1N5615 THRU 1N5623
GLASS PASSIVATED FAST SWITCHING RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0 Ampere
TED*
DO-204AP
PATEN
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.150 (3.8)
0.100 (2.5)
DIA.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
FEATURES
♦ High temperature metallurgically bonded
construction
♦ Hermetically sealed case
♦ Glass passivated cavity-free junction
♦ 1.0 Ampere operation
at TA=55°C with no
thermal runaway
♦ Typical IR less than 0.1µA
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Fast switching for high efficiency
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
*Maximum repetitive peak reverse voltage
Maximum RMS voltage
*Maximum DC blocking voltage
*Minimum reverse breakdown voltage at 50 µA
*Maximum average forward rectified current
0.375” (9.5mm) lead length at
TA=55°C
*Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
*Maximum instantaneous forward voltage at 1.0A
*Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
TA=200°C
*Maximum reverse recovery time (NOTE 1)
*Maximum junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
*Operating junction temperature range
*Storage temperature range
SYMBOLS
VRRM
VRMS
VDC
V(BR)
I(AV)
1N5615
200
140
200
220
IFSM
VF
IR
trr
150
CJ
45
RΘJA
TJ
TSTG
NOTES:
(1) Reverse recovery test conditions IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 12 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B.mounted
*JEDEC registered values
1N5617
400
280
400
440
1N5619
600
420
600
660
1.0
1N5621
800
560
800
880
50.0
1.2
0.5
25.0
1500.0
150
250
300
35
25
20
55.0
-65 to +175
-65 to +200
1N5623
1000
700
1000
1100
500
15
UNITS
Volts
Volts
Volts
Volts
Amp
Amps
Volts
µA
ns
pF
°C/W
°C
°C
4/98