1N5614 Datasheet, PDF (1/2 Pages) General Semiconductor – GLASS PASSIVATED MEDIUM-SWITCHING JUNCTION RECTIFIER

1N5614 THRU 1N5622
GLASS PASSIVATED MEDIUM-SWITCHING JUNCTION RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0. Ampere
PATENTED*
DO-204AP
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
0.150 (3.8)
0.100 (2.5)
DIA.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
FEATURES
♦ High temperature metallurgically bonded construction
♦ 1.0 Ampere operation
at TA= 55°C with
no thermal runaway
♦ Typical IR less than 0.1µA
♦ Hermetically sealed package
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375” (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
* Maximum repetitive peak reverse voltage
Maximum RMS voltage
* Maximum DC blocking voltage
* Minimum reverse breakdown voltage at 50µA
Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=55°C
* Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
* Maximum instantaneous forward voltage at 1.0A
* Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
TA=200°C
* Maximum reverse recovery time (NOTE 1)
Maximum junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
* Operating junction temperature range
* Storage temperature range
SYMBOLS
VRRM
VRMS
VDC
VBR
I(AV)
1N5614
200
140
200
220
1N5616
400
280
400
440
1N5618
600
420
600
660
1.0
1N5620
800
560
800
880
IFSM
VF
IR
trr
CJ
45
RΘJA
TJ
TSTG
50.0
1.2
0.5
25.0
1500
2.0
35
25
20
55.0
-65 to +175
-65 to +200
1N5622
1000
700
1000
1100
15
UNITS
Volts
Volts
Volts
Volts
Amp
Amps
Volts
µA
µs
pF
°C/W
°C
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 12 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length P.C.B. mounted
*JEDEC registered values
4/98