1N5550 Datasheet, PDF (1/2 Pages) General Semiconductor – GLASS PASSIVATED JUNCTION RECTIFIER

1N5550 THRU 1N5552
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 3.0 Amperes
PATENTED*
Case Style G4
1.0 (25.4)
0.180 (4.6)
MIN.
0.115 (2.9)
DIA.
0.300 (7.6)
MAX.
0.042 (1.07)
0.038 (0.962)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
FEATURES
♦ Glass passivated cavity-free junction
♦ High temperature metallurgically bonded construction
♦ Hermetically sealed package
♦ Capable of meeting
environmental
standards of
MIL-S-19500
♦ Medium switching for
improved efficiency
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.037 ounce, 1.04 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
*Maximum repetitive peak reverse voltage
Maximum RMS voltage
*Maximum DC blocking voltage
*Minimum reverse breakdown voltage at 50µA
*Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 9.0A
*Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=100°C
TA=200°C
*Maximum junction capacitance (NOTE 1)
*Maximum reverse recovery time (NOTE 2)
Typical thermal resistance (NOTE 3)
*Operating and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
V(BR)
I(AV)
IFSM
VF
IR
CJ
trr
RΘJA
RΘJL
TJ, TSTG
1N5550
200
140
200
240
150
1N5551
400
280
400
460
3.0
1N5552
600
420
600
660
100.0
1.2
1.0
25.0
1500.0
120
100
2.0
22.0
12.0
-65 to +200
UNITS
Volts
Volts
Volts
Volts
Amps
Amps
Volts
µA
pF
µs
°C/W
°C
NOTES:
(1) Measured at 1.0 MHZ and applied reverse voltage of 12.0 Volts
(2) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375” (9.5mm) lead length,
with both leads mounted between heat sinks.
*JEDEC registered values
4/98