1N5415 Datasheet, PDF (1/2 Pages) General Semiconductor – GLASS PASSIVATED FAST SWITCHING RECTIFIER

1N5415 THRU 1N5420
GLASS PASSIVATED FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 3.0 Amperes
TED*
Case Style G4
PATEN
0.180 (4.6)
0.115 (2.9)
1.0 (25.4)
MIN.
DIA.
0.300 (7.6)
MAX.
0.042 (1.07)
0.038 (0.962)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
FEATURES
♦ Glass passivated cavity-free junction
♦ High temperature metallurgically bonded construction
♦ Hermetically sealed package
♦ Capable of meeting
environmental
standards of
MIL-S-19500
♦ Fast switching for
high efficiency
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.037 ounce, 1.04 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
*Maximum repetitive peak reverse voltage
Maximum RMS voltage
*Maximum DC blocking voltage
*Minimum reverse breakdown voltage at 50µA
*Maximum average forward rectified current
0.375” (9.5mm) lead lengths atTA=55°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TA=100°C
Maximum instantaneous forward voltage at 3.0A*
9.0A
Maximum DC reverse current
at rated DC blocking voltage
*TA=25°C
TA=100°C
*TA=175°C
*Maximum reverse recovery time (NOTE 1)
*Maximum junction capacitance (NOTE 2)
Typical thermal resistance (NOTE3)
*Operating and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
VBR
1N5415
50
35
50
55
1N5416
100
70
100
110
I(AV)
1N5417
200
140
200
220
1N5418
400
280
400
440
3.0
1N5419
500
350
500
550
1N5420
600
420
600
660
UNITS
Volts
Volts
Volts
Volts
Amps
IFSM
80.0
1.10
VF
1.50
1.0
IR
20.0
2.0
trr
150
250
CJ
200 175
150
120
110
RΘJA
22.0
TJ,TSTG
-65 to +175
Amps
Volts
µA
400
ns
100
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR= 1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 12.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, with both leads to heat sink
*JEDEC registered values
4/98