1N5059 Datasheet, PDF (1/2 Pages) Powerex Power Semiconductors – Passivated Rectifier

1N5059 THRU 1N5062
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 800 Volts Forward Current - 1. 0 Ampere
D* _DO-204AP
TENTE _{0.034 (0.86)}
A _{0.028 (0.71)}
P _DIA.
1.0 (25.4)
MIN.
0.150 (3.8)
0.100 (2.5)
DIA.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306
FEATURES
♦ High temperature metallurgically bonded
construction
♦ 1.0 Ampere operation at TA=75°C
with no thermal runaway
♦ Typical IR less than 0.1µA
♦ Hermetically sealed package
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ High temperature soldering guaranteed:
350°C/10 seconds 0.375” (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case:JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
* Maximum repetitive peak reverse voltage
Maximum RMS voltage
* Maximum DC blocking voltage
* Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=75°C
* Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
* Maximum instantaneous forward voltage at 1.0A
* Maximum full Load reverse current, full cycle
average 0.375” (9.5mm)
lead length at
TA=25°C
TA=75°C
* Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=175°C
Typical reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
* Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
1N5059
200
140
200
1N5060
400
280
400
1N5061
600
420
600
1.0
1N5062
800
560
800
IFSM
VF
IR(AV)
IR
trr
CJ
RΘJA
TJ, TSTG
50.0
1.2
5.0
150
100
5.0
300
200
1.5
15.0
55.0
-65 to +175
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, lrr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length P.C.B. mounted
*JEDEC registered values
UNITS
Volts
Volts
Volts
Amp
Amps
Volts
µA
µA
µs
pF
°C/W
°C
4/98