1N4933GP Datasheet, PDF (1/2 Pages) Fairchild Semiconductor – 1.0 Ampere Glass Passivated Fast Recovery Rectifiers

1N4933GP THRU 1N4937GP
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 600 Volts Forward Current - 1.0 Ampere
*
TED
PATEN
DO-204AL
0.107 (2.7)
0.080 (2.0)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
NOTE: Lead diameter is ^{0.026 (0.66)} for suffix "E" part numbers
0.023 (0.58)
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation is covered by
Patent No.3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
FEATURES
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically bonded construction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ For use in high frequency rectifier circuits
♦ Fast switching for high efficiency
♦ Glass passivated cavity-free junction
♦ 1.0 Ampere operation at TA=75°C with no thermal
runaway
♦ Typical IR less than 0.1µA
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.34 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
1N
SYMBOLS 4933GP
1N
4934GP
1N
1N
4935GP 4936GP
* Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
* Maximum RMS voltage
VRMS
35
70
140
280
* Maximum DC blocking voltage
VDC
50
100
200
400
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75°C
I(AV)
1.0
* Peak forward surge current
8.3ms single half sine-wave superimposed
IFSM
30.0
on rated load (JEDEC Method)
* Maximum instantaneous forward voltage at 1.0A
VF
1.2
* Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
IR
5.0
100.0
* Maximum reverse recovery time (NOTE 1)
trr
200.0
Typical junction capacitance (NOTE 2)
CJ
15.0
Typical thermal resistance (NOTE 3)
RΘJA
55.0
* Operating junction and storage temperature range
TJ, TSTG
-65 to +175
1N
4937GP
600
420
600
UNITS
Volts
Volts
Volts
Amp
Amps
Volts
µA
ns
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=1.0A, VR=30 Volts
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
* JEDEC registered values
4/98