English
Language : 

1N4001GP Datasheet, PDF (1/2 Pages) Fairchild Semiconductor – 1.0 Ampere Glass Passivated Rectifiers
1N4001GP THRU 1N4007GP
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere
*
TED
TEN
PA
DO-204AL
0.107 (2.7)
0.080 (2.0)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
NOTE: Lead diameter is 0.026 (0.66) for suffix "E" part numbers
0.023 (0.58)
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
FEATURES
♦ Plastic package has
Underwriters
Laboratory Flammability
Classification 94V-0
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ 1.0 Ampere operation at TA=75°C with no thermal
runaway
♦ Typical IR less than 0.1µA
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
* Maximum repetitive peak reverse voltage
VRRM
* Maximum RMS voltage
VRMS
* Maximum DC blocking voltage
VDC
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75°C
I(AV)
* Peak forward surge current
8.3ms single half sine-wave superimposed
IFSM
on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
VF
* Maximum full load reverse current, full cycle
average 0.375" (9.5mm) lead length TA= 75°C
IR(AV)
* Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=125°C
IR
Typical reverse recovery time (NOTE 1)
trr
Typical junction capacitance (NOTE 2)
CJ
Typical thermal resistance (NOTE 3)
RΘJA
RΘJL
* Operating junction and storage temperature range TJ, TSTG
1N
1N
4001GP 4002GP
50 100
35 70
50 100
1N
4003GP
200
140
200
1N
4004GP
400
280
400
1N
1N
1N
4005GP 4006GP 4007GP UNITS
600 800 1000 Volts
420 560
700 Volts
600 800 1000 Volts
1.0
Amp
30.0
1.1
30.0
5.0
50.0
2.0
8.0
55.0
25.0
-65 to +175
Amps
Volts
µA
µA
µs
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr= 0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
*JEDEC registered values
4/98