1N3611GP Datasheet, PDF (1/2 Pages) General Semiconductor – GLASS PASSIVATED JUNCTION RECTIFIER

1N3611GP THRU 1N3614GP AND 1N3957GP
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0 Ampere
*
TED
TEN
PA
DO-204AL
0.107 (2.7)
0.080 (2.0)
DIA.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
NOTE: Lead diameter is ^{0.026 (0.66)} for suffix "E" part numbers
0.023 (0.58)
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically bonded construction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ Glass passivated cavity-free junction
♦ 1.0 Ampere operation at TA=75°C with
no thermal runaway
♦ Typical IR less than 0.1µA
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AL molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
* Maximum repetitive peak reverse voltage
* Maximum RMS voltage
* Maximum DC blocking voltage
* Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75°C
* Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Maximum instantaneous forward voltage at 1.0A
* Maximum DC reverse current
at rated DC blocking voltage
TA=25°C
TA=150°C
Typical reverse recovery time (NOTE 1)
Typical junction capacitance (NOTE 2)
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
SYMBOLS
VRRM
VRMS
VDC
I(AV)
1N
3611GP
200
140
200
1N
3612GP
400
280
400
1N
3613GP
600
420
600
1N
3614GP
800
560
800
1N
3957GP
1000
700
1000
1.0
UNITS
Volts
Volts
Amps
Amps
IFSM
VF
IR
trr
CJ
RΘJA
RΘJL
TJ, TSTG
30.0
1.0
1.0
300.0
2.0
8.0
55.0
25.0
-65 to +175
Amps
Volts
µA
µs
pF
°C/W
°C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr =0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
* JEDEC registered values
4/98