XP95-LI Datasheet, PDF (2/2 Pages) Gamewell-FCI by Honeywell – Analog XP95 line isolator with mounting base

Standard Applications
The XP95-LI line isolator should be utilized any time the
integrity of the line is essential.The XP95-LI is typically
used at areas within a line that branch off in a unique direc-
tion, or to provide additional protection by isolating zone
monitoring devices.
Engineer’s Specifications
The contractor shall furnish and install, where indicated on
the plans, the XP95-LI line isolator. The combination isola-
tor and mounting base shall be UL Listed and UL Listed as
compatible with the Gamewell-FCI 600 Series fire alarm
control panel.
The mounting base will be unique to the isolator and will
not accept any other device type. The isolator shall contain
a yellow LED that shall flash at three-second intervals
when the isolator circuit is switched on. The line isolator
shall be Gamewell-FCI model XP95-LI.
Specifications
Device:
The device is polarity sensitive:
negative line isolated in loop short
circuit.
Line Voltage (normal loop operation):
17 – 41 V
Line Resistance Standby:
0.4 ohm ± 0.1
Ambient Temperature:
–20° C to 70°C (–4°F to 158°F)
Maximum Continuous Load Current:
600 mA
Line Resistance Operated:
80K ohm
Current Consumption Standby:
40 µA
Current Consumption Operated:
0.0012 A continuous
Maximum Permissible Short Circuit Current:
1.0 A
Switching Voltage:
15 V.
Operating Temperature Range:
–20°C to 70°C
Power-up Time:
3 seconds (1 – 20 isolators)
Ordering Information
Model
XP95-LI
Description
Analog XP95 line isolator with mounting base
(55000-750).
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: [phone] • Fax: [phone]
CS-2051 Rev. A page 2 of 2
www.gamewell-fci.com