PID-95 Datasheet, PDF (2/2 Pages) Gamewell-FCI by Honeywell – Point Identification Device

Engineer’s Specifications
Addressable interface devices shall be provided for the
monitoring and supervision of contact type devices con-
nected to the Fire Alarm Control Panel. The devices shall
monitor a normally open dry contact. The addressable
interface devices shall communicate to the main control
panel via the analog addressable circuit. The interface
device shall be Gamewell-FCI PID-95 or PID-95P.
Specifications
PID-95
Standby Current:
Alarm Current:
Operating
Temperature:
Relative Humidity:
Mounting:
PID-95P
Standby Current:
Alarm Current:
Operating
Temperature:
Relative Humidity:
Mounting:
0.0005 A
0.0015 A
0° C to 49° C (32°F to 120 °F)
85%, non-condensing
4" (10.16 cm) square backbox with
blank cover plate
0.0005 A
0.0015 A
0° C to 49° C (32°F to 120°F)
85%, non-condensing
4" (11 cm) 4.688" (11.908 cm), double
gang Backbox.
Ordering Information
Model
PID-95
PID-95P
70839
Description
Addressable point identification device for
monitoring contact devices.
Addressable input interface device mounted
on 4.688" (11.908 cm) plastic plate.
Trim ring for flush-mounting on the PID-95P.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: [phone] • Fax: [phone]
CS-2044 Rev. A page 2 of 2
www.gamewell-fci.com