AAM95 Datasheet, PDF (2/2 Pages) Gamewell-FCI by Honeywell – Analog Addressable Module

The analog addressable module shall be capable of monitoring up to 126
devices per circuit. Analog circuitry shall be capable of supporting a priority
interrupt technique in order to facilitate real-time event processing. Analog
addressable modules shall be supplied as required in order to monitor all
necessary points.
Ordering Information
AAM95-1
One-loop, 126 points Analog Addressable Module with
standard display for IF632 or IF650 FACP. Includes
terminal strip and mounting hardware. XP95 protocol
compatible.
AAM95-2
Two-loop, 252 points Analog Addressable Module with
standard display for IF632 or IF650 FACP. Includes
terminal strip and mounting hardware. XP95 protocol
compatible.
AAM95-4
Four-loop, 504 points Analog Addressable Module with
standard display for IF632 or IF650 FACP. Includes
terminal strips and mounting hardware. XP95 protocol
compatible.
AAM95-1ND
AAM95-1 with no display.
AAM95-2ND
AAM95-2 with no display.
AAM95-4ND
AAM95-4 with no display.
AAM95-2E
Note: ND models allow the addition of another display
(i.e., BCD, RCE, SCD) in the same module bay.
Two-circuit Analog Addressable Expansion Module for
use with AAM95-2. Includes terminal strip and mounting
hardware. XP95 protocol compatible.
Specifications
Standby current
30 mA (1 circuit).
35 mA (2 circuits).
55 mA (4 circuits).
Alarm current
30 mA (1 circuit).
35 mA (2 circuits).
55 mA (4 circuits).
Gamewell-FCI
12 Clintonville Road
Northford, CT 06472-1610
Phone: [phone]
Fax: [phone]
www.gamewell-fci.com
A Honeywell Company
© 2006 Gamewell-FCI
Specifications and wiring information are provided for information only and are
believed to be accurate. Gamewell-FCI assumes no responsibility for their use.
Data and design are subject to change without notice. Installation and wiring
instructions shipped with the product shall always be used for actual installation.
For more information, contact Gamewell-FCI.
Page 2 of 2
AAM95 CS-2021 09/01/06