SP2C2415 Datasheet, PDF (1/2 Pages) Systemsensor advanced ideas. – Ceiling Mount Speaker Strobes

SpectrAlert^® SP2C Series
Ceiling-Mount Speaker/Strobes
Description
System Sensor’s
SP2C Series
Speaker/Strobes
combine leading-edge
strobe and speaker
technology with a
design specifically
intended for ceiling-
mount applications.
Technology —
SpectrAlert® SP2C ceil-
ing speaker/strobes
combine the low current
draw of the ceiling-
mount SpectrAlert® strobes, with the intelligible, fidelity sound quality of the
SpectrAlert® SP200 Series evacuation speaker.
Flexibility — Like all SpectrAlert® products, the SP2C Series ceiling speaker/
strobes feature the flexibility to meet a wide variety of applications. The 24-volt
strobe is available in six different candelas, including 177 candela for sleeping
areas. The speaker offers field-selectable 25.0/70.7 voltage and 1/4, 1/2, 1, and 2
watt power taps.
Aesthetics — The SP2C Series ceiling speaker/strobes offer a design that is
sensitive to the aesthetic demands of ceiling-mount applications. The round shape
maintains a low-profile appearance, similar to that of a smoke detector. Its stylish
curves and design further refine the aesthetics over other generic wall/ceiling-mount
designs. Yet SpectrAlert®’s round shape provides clearly visible “FIRE” identification
from all angles.
Installation — The SP2C Series ceiling speaker/strobes include several fea-
tures to simplify installation. By incorporating the SP200 Series speaker, the entire
unit may be mounted to a standard 4" x 4" x 2-1/8" (101.6 x 101.6 x 53.975 mm)
backbox without an extension ring. An optional backbox skirt is also available for
surface-mount applications. With SpectrAlert®’s round shape, aligning the backbox
with the room’s walls is not necessary — SpectrAlert® always lines up.
Engineer’s Specifications
Ceiling speaker/strobe shall be a System Sensor Model ________ listed to UL
1480 and UL 1971 and be approved for fire protective signaling systems.
Speaker shall be capable of operating at 25.0 or 70.7 nominal VRMS, and shall
have a frequency range of 400 to 4,000 Hz. Speaker shall have power taps
which are selected by shunts. The strobe shall comply with the NFPA 72
requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s
entire operating voltage range. The strobe light shall consist of a xenon flash
tube and associated lens/reflector system
Features
• Combines SpectrAlert® ceiling-
mount strobe and speaker technolo-
gies for low current draw, fidelity
sound quality.
• 24 VDC models available with 15,
15/75, 30, 75, 95, 115, and 177 can-
dela strobes.
• 25.0 and 70.7 volt speaker with four
field-selectable power taps.
• Ceiling-specific shape, profile, and
aesthetics.
• Strobe is synchronizable with MDL
Sync•Circuit™ module.
• Mounts to a 4" x 4" x 2-1/8" (101.6
x 101.6 x 53.975 mm) backbox
without an extension ring.
• Round shape offers greater place-
ment flexibility.
Listings
Listings and approvals below
apply to the basic SpectAlert®
SP2C Series Celing-Mount
Speaker/Strobes. In some cases,
certain modules may not be listed
by certain approval agencies, or
listing may be in process. Consult
factory for latest listing status.
• UL Listed: file S4048.
• CSFM approved: file 7320-
1209:200.
• MEA approved: file 63-00-E (15,
15/75, 30, 75, 95 cd models),
218-00-E (115, 177 cd models).
SpectrAlert® is a registered trademark and Sync•Circuit™ is a trademark
of System Sensor.
SpectrAlert® SP2C Series CS-2453 10/21/04
Page 1 of 2