SN600-PTR Datasheet, PDF (1/2 Pages) Gamewell-FCI by Honeywell – Network parallel printer, 120 VAC power

SN600-PTR
Printer
Description
The SN600-PTR UL-Listed printer is used with Gamewell 600 Series Fire
Alarm Control Panels (FACPs) to provide a written record of system events
and status changes. It features enhanced ground isolation to reduce ground
faults.
Applications
The SN600-PTR printer is for use with Gamewell 600 Series FACPs.
Printed transaction records reduce the man-hours required to install and
maintain a system. A printed record of all system events (alarms, troubles,
etc.) and status changes can be especially valuable in the event of a dis-
puted incident.
Construction and Operation
The printer is housed in its own separate enclosure and is suitable for
placement on a desk top, counter, or table.
Consult the control panel installation manual for the proper method and
pin numbers used to complete the electrical connection to the control panel.
NOTE: If printer operation is required during failure of primary power, use
of a separate UL-Listed Uninterruptable Power Supply (UPS) system is
recommended.
Ordering Information
SN600-PTR
Network parallel printer, 120 VAC power.
Features
• Provides a hard-copy printout of all
system events and status changes.
• Time-stamps the printed record of each
event and status change with the current
time-of-day and date.
• Uses standard 9" x 11" tractor-feed
fanfold paper.
• Provides 80 columns of data at 10
characters per inch.
• Provides printed record of system
configuration and addressable device
parameters.
• Nine-pin print head.
• Very quiet (approximately 53 dBA).
Specifications
• Printing method: Serial or parallel
printing with 9-pin matrix print head.
• Printing speed, copy draft: 310 cps at
10 cpi.
• Character density: 10 cpi standard (12,
15, 17.1, and 20 cpi available via front
panel).
• Graphic resolution (V x H): 144 x 240 dpi.
• Ribbon life (approximate): 4 million
characters (DPQ).
• Acoustic noise level: 53 dBA (approx.).
• Dimensions: 19" (48.26 cm) wide x 7.9"
(20.07 cm) high x 9.7" (24.64 cm) deep.
• Weight: 17.6 pounds (7.9 kg).
• Power supply: 120/240 VAC.
• Power consumption: 50 watts (operating).
• Operating environment temperature:
50°F to 104°F (10°C to 40°C).
• Operating environment humidity: 20%
to 80% (noncondensing).
Listings
Listings and approvals below apply to
the basic SN600-PTR Printer.
In some cases, certain modules may not
be listed by certain approval agencies,
or listing may be in process. Consult
factory for latest listing status.
• UL Listed: file S521.
SN600-PTR CS-2502 09/01/06
Page 1 of 2