|
SC2415 Datasheet, PDF (1/4 Pages) Gamewell-FCI by Honeywell – SC Strobes and PC Horn/Strobes | |||
|
SpectrAlert®
Ceiling Mount Series
SC Strobes and PC Horn/Strobes
6798pho1.jpg
Description
SpectrAlert® Ceiling Mount Series
Strobes and Horn/Strobes from
System Sensor offer a fresh approach
to the unique needs of ceiling-mount
applications.
SC Strobe (top) and
PC Horn/Strobe (bottom)
Technology â Like the original
SpectrAlert® line, the SpectrAlert®
Ceiling Mount Series offers significant
current draw reductions over other
ceiling-mount strobes and horn/
strobes.
6798pho2.jpg
Flexibility â SpectrAlert® Ceiling
Mount strobes and horn/strobes are
available in seven different candelas,
including 177 candela for sleeping
areas. The horn/strobeâs tones are
field-selectable with a three-position
switch on the back of the unit.
Selections include: electromechanical
and 3 KHz tones; temporal 3 and non-
temporal 3 patterns; and high and low
volume.
Aesthetics â SpectrAlert® Ceiling Mount strobes and horn/strobes offer a
design that is sensitive to the aesthetic demands of ceiling-mount applications.
The round shape maintains a low-profile appearance, similar to that of a smoke
detector. Its stylish curves and design further refine the aesthetics over other
generic wall/ceiling-mount designs. Yet SpectrAlert娉s round shape provides
clearly visible âFIREâ identification from all angles.
Installation â SpectrAlert®âs compact design also offers installation savings.
The strobe and horn/strobe models mount to a 4" x 4" x 1.5" (101.6 x 101.6 x
38.1 mm) backbox, and take up little room in the backbox, making connections
easier. With SpectrAlert®âs round shape, aligning the backbox with the roomâs
walls is not necessary â SpectrAlert® always lines up.
Architectural/Engineering Specifications
Strobe shall be a System Sensor SpectrAlert® Model ______ Listed to UL 1971
and be approved for fire protective service where ceiling-mount strobes are
permitted. The strobe shall be wired as a primary signaling notification
appliance and shall flash at 1 Hz over the strobeâs entire operating range. The
strobe light shall consist of a xenon flash tube and associated lens/reflector
system.
Horn/Strobe shall be a System Sensor SpectrAlert® Model ______ Listed to UL
1971 and UL 464 and be approved for fire protective service where ceiling-
mount horn/strobes are permitted. The horn/strobe shall be wired as a primary
signaling notification appliance and shall flash at 1 Hz over its entire operating
range. The strobe light shall consist of a xenon flash tube and associated lens/
reflector system. The horn shall have two tone options, two audibility options,
and the option to switch between a temporal 3 pattern and a non-temporal
continuous pattern. These options shall be selected by a multi-position switch.
SpectrAlert® SC/PC CS-2451 06/10/05
Page 1 of 4
Features
⢠Lower current draw.
⢠Available in 15, 15/75, 30, 75, 95, 115,
and 177 candela strobes.
⢠Horn/strobe models include a three-
position switch for field-selecting horn
tones: electromechanical/3KHz; temporal
3/non-temporal 3; high/low dBA output.
⢠Synchronizable with MDL Syncâ¢Circuitâ¢
module.
⢠Ceiling-specific shape, profile, and
aesthetics.
⢠Mounts to a 4" x 4" x 1.5" (101.6 x
101.6 x 38.1 mm) backbox.
⢠Round shape offers greater placement
flexibility.
Listings
Listings and approvals below apply to
the SC Strobes and PC Horn/Strobes.
In some cases, certain modules may not
be listed by certain approval agencies,
or listing may be in process. Consult
factory for latest listing status.
⢠UL Listed: files S4011, S5512.
⢠ULC Listed: file CS549.
⢠MEA approved: files 144-00-E, 61-00-E.
⢠CSFM approved: files 7125-1209:201,
7135-1209:204.
⢠FM approved.
|
▷ |