PTR-2 Datasheet, PDF (1/1 Pages) Gamewell-FCI by Honeywell – Dot Matrix Printer

PTR-2
Description
The Fire Control Instruments Model PTR-2 narrow
carriage, 9-pin dot matrix printer is designed to
work with the various FCI fire alarm control panels.
This printer will furnish a printed record of all
events occurring in the system. Small and com-
pact, the PTR-2 printer is the ideal supplement to
the FCI fire alarm system.
Installation
The PTR-2 is simple to install. The unit must be
plugged in to a local 120 VAC power source. A
factory-furnished cable is plugged into the printer
and the other end is plugged into the printer port of
the FCI fire alarm control panel.
Note: The PTR-2 operates on 120 VAC only. For
operation during a power failure, we recommend
use of an uninterruptible power supply (UPS).
Paper Type
Max. Media Size:
Media Type:
A4 (8.25 in x 11.7 in.)
Continuous forms, perforated
plain paper, plain paper
Specifications
Input
120 VAC, 60 Hz
Power
90 watts (Operational)
10 watts (Stand By)
I/F Type
RS-232C
Baud Rate:
7100
9,600 bits/second
7200
Operating
Temperature
1,200 bits/second
50^° to 95^° F (10^° to 35^° C)
Relative Humidity 20 - 80%
Dimensions
7.8" H x 16.8" W x8.5"D
(19.8 H x 42.7 W x 21.6 D cm)
Weight
10.8 lbs. (4.9 kg)
Dot Matrix Printer
PTR-2
Features
• Supervised Operation.
• High Speed Printing.
• Compact Design.
• Correspondence Quality Print.
• Simple Installation.
• Low Noise Level.
• Ergonomic Design.
Ordering Information
Model
PTR-2
Description
Dot Matrix Printer
E3 Series^™ is a trademark of FCI.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 - Tel: [phone] - Fax: [phone]
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2006 Gamewell-FCI All rights reserved.
www.gamewell-fci.com
9020-0550 Rev. B page 1 of 1