PIM-SS Datasheet, PDF (1/2 Pages) Gamewell-FCI by Honeywell – Ten-Input Monitor Module

PIM-SS
Ten-Input Monitor Module
Description
Gamewell’s SmartScan^TM PIM-SS ten-
input monitor module provides an
interface between a control panel
and normally open contact devices
in intelligent alarm systems such as
conventional pull stations and heat
detectors.
The first address on the PIM-SS is
set from 01 to 90 and the remaining
modules are automatically assigned
to the next nine higher addresses.
Provisions are included for disabling
a maximum of two unused ad-
SS-M with SS-B6 base
dresses.
The supervised state (normal, open,
or short) of the monitored device is
sent back to the panel. A common SLC input is used for all modules, and the
initiating device loops share a common supervisory supply and ground — other-
wise each monitor operates independently from the others.
Each PIM-SS module has panel-controlled green LED indicators. The panel can
cause the LEDs to blink, latch on, or latch off.
Product Line Information
PIM-SS: Ten-input monitor module.
BB-25: Optional cabinet for up to six modules mounted on CHS-6 chassis (be-
low). Dimensions, DOOR: 24.0" (60.96 cm) wide x 12.632" (32.0852 cm) high, x
1.25" (3.175 cm) deep, hinged at bottom; BACKBOX: 24.0" (60.96 cm) wide x
12.550" (31.877 cm) high x 5.218" (13.2537 cm) deep.
CHS-6: Chassis, mounts up to six modules in a BB-25 cabinet.
Features
• Ten addressable Class B or
five addressable Class A
initiating device circuits.
• Removable 12 AWG (3.25
mm²) to 18 AWG (0.9 mm²)
plug-in terminal blocks.
• Use with Gamewell’s IF602,
610, 632, 654 and 658 with
SmartScan™ loop card.
• Status indicators for each
point.
• Unused addresses may be
disabled.
• Rotary address switches.
• Class A or Class B operation.
• Mount one or two modules in a
BB-XP cabinet (optional).
• Mount up to six modules on a
CHS-6 chassis in a BB-25
cabinet (optional).
• Mounting hardware included.
Listings
Listings and approvals below
apply to the PIM-SS Ten-Input
Monitor Module. In some
cases, certain modules may
not be listed by certain ap-
proval agencies, or listing may
be in process. Consult factory
for latest listing status.
• UL Listed: file S521.
• CSFM approved:
file 7300-1288:169.
• MEA approved:
file 368-01-E Vol. II.
PIM-SS CS-2468 09/01/06
Page 1 of 2