P1224MC Datasheet, PDF (1/3 Pages) Gamewell-FCI by Honeywell – SELECTABLE OUTPUT STROBES AND HORNS

System Sensor
SpectrAlert Series
www.firecontrolinstruments.com
SELECTABLE OUTPUT
Description
The System Sensor Spectralert^® select-
able output strobes and horn/strobes offer
STROBES AND HORNS
MODELS P1224MC,
1⁷/8” backbox using the universal mount-
ing plate included with each Spectralert unit.
S1224MC
enhanced features that include the widest
An optional strobe sychronization mod-
range of candela options available, and the ule is available for compliance the Ameri-
capability to recognize and self-adjust for cans with Disabilities Act (ADA). The MDL
either 12 or 24 volt operation.
(red) MDLW (white) synchronizes the
Spectralert selectable candela wall- strobes at 1 Hz and the horns to a Tempo-
mounted strobes and horn/strobes offer ral 3 coded pattern. The synchronization
key performance features long associated modules mounts on a 4 ¹¹/16” x 4 ¹¹/16” x
with the Spectralert name. The selectable 2 ¹/8” backbox and supports two (2) Style
candela strobes and horn/strobes offer av- Y (Class B) or one (1) Style Z (Class A)
erage current draws that are not only lower notification appliance circuit. A separate
than conventional fixed-candela Spectralert horn control input is available to allow
products, but also lower than similar prod- silenceable audible devices and non-
ucts by others. By consuming less cur- silenceable visual devices on the same pair
rent, the ability to connect even more de- or wires.
vices per circuit is possible, resulting in
lower installed cost.
Spectralert selectable candela strobes
and horn/strobes offer the same installa-
tion-friendly features synonymous with the
Spectralert name, such as the option of
2- and 4-wire operation; the ability to use
standard size backboxes with no encroach-
ment into the box; and universal mounting
incorporating the labor-saving QuickClick™
feature. Such labor-saving features make
wire connections simple and fast, further
reducing installed cost.
These strobes and horn/strobes offer the
broadest range of candela options. In ad-
dition, they can operate on either 12V or
24V with no settings required. The device
recognizes and self-adjusts to the correct
current automatically. Temporal Pattern 3
Features
• Operates on either12 or 24 VDC
• Widest Range of Candela Options:
• 12V: 15, 15/75 candela
• 24V: 15, 15/75, 30, 75, 110 candela
• Easy Candela Selection
• Easy DIP Switch Selection for Horn
Options
• Weatherproof Versions Available
• Eask Mounting with QuickClick™
• Synchronization avalable with
optional MDL Sync•Circuit™ module
• Meets UL1971, NFPA72, and ADA
Signaling Requirements
S5512 S4011
3014150
or continuous tone options continue to be
available, in either an electro-mechanical
or 3 kHz pattern
These strobes and horn/strobes incor-
porate the same stylish, low profile design
of the conventional Spectralert products,
122-02-E
126-02-E
7125-1209:222
7135-1209:223
for a consistent and aesthetically pleas-
ing appearance across the entire product
line. The selectable strobe and horn/strobe
An ISO 9001 Company
is available in either red or white.
. ^{The devicesmount on a standard 4” x 4”}
x 1¹/2” backbox or a single gang 2” x 4” x
Specifications are provided for information only, and
are not intended to be used for installation purposes
and are believed to be accurate. However, no respon-
sibility is assumed by Fire Control Instruments for their
use.
Specifications subject to change without
notice.
© 2003
All Rights Reserved
9020-0562/Ver. 1.2
Page 1 of 3