M34-52 Datasheet, PDF (1/4 Pages) Gamewell-FCI by Honeywell – Three-Fold Fire Alarm Boxes and Transmitters

Three-Fold
Fire Alarm Boxes
and Transmitters
Description
Gamewell-FCI coded fire alarm boxes and industrial trans-
mitters provide large industries, institutions and communi-
ties with the surest and safest means of prompt, effective
fire alarm reporting. They are positive and bring help
directly to the exact location from which the alarm was
sent. They minimize human error in fire reporting. There is
no confusion on the part of either sender or receiver; no
hazardous, time-consuming confusion between streets,
roads and avenues with the same or similar names.
The three-fold fire alarm boxes and transmitters are
designed for coded alarm reporting into a normally closed
series metallic signaling circuit having a normal DC flow of
0.100 amp. They transmit signals over this circuit in accor-
dance with their respective code numbers.
These three-fold assemblies are available in numerous
variations which can be classified into three major catego-
ries as follows:
Three-Fold Manual Fire Alarm Box
Strictly manually operated by moving the pull guard forward
which exposes the operating lever. Downward pressure on
this lever actuates the code signal mechanism.
Three-Fold Master Fire Alarm Box
Master fire alarm boxes have provisions for electrical actu-
ation in addition to the manual operation. They are
designed to provide the connecting link between a principal
municipal or industrial fire alarm system and auxiliary type
fire alarm systems installed for protection of public build-
ings, schools, industrial plants etc. With such provisions,
any alarm originating from heat detectors, smoke detec-
tors, sprinkler heads, etc. are automatically transmitted
through the Three-Fold Master Fire Alarm Box to the cen-
tral headquarters.
Three-Fold Fire Alarm Boxes
and Transmitters
Features
Three-Fold Fire Alarm Box
• Manual activation.
• Remote electrical activation.
• Manual or remote activation.
• Positive non-interfering movement.
• Automatic grounding.
• Red or blue.
• Local energy transmission.
• Surface or semi-flush mount.
An ISO 9000-2000 Company
SIGNALING
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: [phone] • Fax: [phone]
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2007 Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
CS-2261 Rev. A1 page 1 of 4