LCD-SLP Datasheet, PDF (1/1 Pages) Gamewell-FCI by Honeywell – LCD Touchscreen Annunciator Display

LCD-SLP
Description
The Gamewell-FCI, Liquid Crystal Display, Smart Loop
Panel (LCD-SLP) is a touchscreen annunciator display
used with the S3 Series and E3 Series^® Systems. The
LCD-SLP provides an easy-to-use, intuitive interface for
the operator’s control. The 4.3” (10.92 cm) color touchscreen
display shows the following:
• System Status
• Service modes
• Event details
The following identify the LED Indicators that display on
the panel.
• AC (green)
• Supervisory (yellow)
• Fire Alarm (red)
• Trouble (yellow)
• Hazard (blue)
• Silenced (yellow)
The five fully-programmable front panel switch/LED combi-
nations provide a direct access to perform the following
tasks:
• Device Bypass
• Lamp Test
• Enable/Disable Groups or Devices
The display features the following physical switches.
• Menu
• System Reset
• Five Programmable
• Drift Walk Test
Switches
Installation
The LCD-SLP is adaptable for installation in the S3, E3^®
Series or Retrofit cabinets. For additional information, refer
to the E3 Series Cabinets Data Sheet, P/N:9020-0649
• S3 Series Cabinets
- SLP-BB basic system enclosure
- S3BB-BB/S3BB-RB system enclosure
• E3 Series^® Cabinets
- AA size cabinet (E3BB-BAA, E3BB-RAA)
- A2 size cabinet (E3BB-BA2, E3BB-RA2)
- A size flush cabinet (E3BB-FLUSH-LCD)
- B-Slim cabinet (E3BB-RBSLIM)
- B size cabinet (E3BB-BB, E3BB-RB)
- C size cabinet (E3BB-BC/INCC, E3BB-RC/INCC)
- D size cabinet (E3BB-BD/INCC, E3BB-RD/INCC)
• Retrofit Cabinets
- IF600-RETROFIT
- 7200-B-RETROFIT
- 7200-C-RETROFIT
Specifications
Operating Voltage: 24 VDC FWR
Operating Current: 0.030 amp
Alarm Current:
0.065 amp
Operating
Temperature:
32° to 120° F (0° to 49° C)
Relative Humidity:
0 to 93%,non-condensing at 90° F
(32° C)
E3 Series^® is a registered trademark of Honeywell International Inc.
UL^® is a registered trademark of Underwriter’s Laboratories Inc.
LCD Touchscreen Annunciator Display
LCD-SLP
Features
• Listed per ANSI/UL^® Standard 864 9th Edition.
• UL Listed and FM approved for Pre-Action/Deluge and
Agent Releasing.
• Provides 4.3” (10.92 cm) color touchscreen display of
System Events.
• Includes five custom function buttons with LEDs for
direct access to system controls.
• Offers the following installation options:
- Locally mounted in the S3 Series panels.
- Remotely mounted in the E3 Series, A2 cabinet or
LCD Flush enclosure.
• Displays the following six LED indicators:
- Alarm
- Hazard
- Trouble
- NAC Silence
- Supervisory
- AC Power
• Shows the Hazard LED to indicate gas, carbon
monoxide or other toxic gases.
• Both the E3 Series (ILI-MB-E3/ILI95-MB-E3) and the
S3 Series (SLP) support up to 15 LCD-SLP displays via
the RS-485 serial interface.
Ordering Information
Part Number
LCD-SLP
E3BB-BA2
E3BB-RA2
E3BB-FLUSH-LCD
SIGNALING
Description
LCD Touchscreen display unit
Remote enclosure with inner door,
black, one LCD slot
Remote enclosure with inner door,
red, one LCD slot
Remote flush mounting enclosure,
black, LCD slot
S1869
FM _MEA
City of
Chicago
APPROVED ^FDNY:
Approved
COA-#6162 7165-1703:0176 Class 1 Reference Certificate
of Compliance
VMA-45894-02C
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: [phone] • Fax: [phone]
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2016 by Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
9021-60782 Rev. E page 1 of 1