IF654 Datasheet, PDF (1/4 Pages) Gamewell-FCI by Honeywell – IdentiFlex 650 base analog/addressable system

600 Series
IdentiFlex 650
Description
Analog Addressable Control Panel
The IdentiFlex 650 (IF650) is a full-featured Fire Alarm
Control Panel (FACP) that can be configured to monitor
and control both analog intelligent addressable devices
and conventional hard-wired zones, providing maximum
application flexibility. It is easily adapted to a new or retrofit
installation, providing up to 2016 analog addressable
points plus 96 conventional circuits. With the addition of a
SmartLink™ network, the IdentiFlex 650 system can
include multiple IF650s or other 600 Series fire alarm pan-
els. The interactive operator’s display uses LED prompting
for easy user operation and programming. The alphanu-
meric display and keypad simplify field programming.
Gamewell-FCI’s Smart Program II can be used to program
the IF650 with a PC.
Integration of analog and hard-wired circuits allows the
system engineer to customize the control panel based on
the application. The CPU automatically senses system
configuration to ensure that modules are correctly posi-
tioned to speed installation and maintenance.
IdentiFlex 650 software allows the system to be custom-
ized to specific applications, such as cross-zoning and
alarm verification.
Front-panel construction is designed to allow routine main-
tenance of the system without disturbing the I/O modules.
Multiple levels of password protection prevent unautho-
rized use. The cabinet is designed with terminal strips for
ease of installation and service.
Operator’s Display
The IdentiFlex 650 operator’s display supplies all the nec-
essary keys and annunciation points to maintain and moni-
tor the system. Alarm, Supervisory and Trouble conditions
are all indicated on the operator’s display by dedicated
LEDs and the internal sounder. The Acknowledge, Reset,
and Signal Silence keys are easily identified on the display.
ID650
Features
• Analog/addressable and conventional input circuits.
• SmartStart™ self-programming logic.
• Fully modular.
• 160-character, four-line display.
• One to 16 Signal Line Circuits (SLC) for up to 2016
analog points.
• Polarity-insensitive SLC wiring (XP95 protocol).
• Automatic default response for increased survivability.
• 1000-event history log.
• Digital SLC protocol.
• PC or front-panel programming.
• Password protected.
• Serial annunciator, remote display, and remote printer
options.
• One-man, selectable-input walk test.
• Automatic drift compensation.
• Coded signaling.
• Day/night mode settings.
• Approved for Suppressant Releasing and Supervisory
Service.
• UDACT compatible.
• Adjustable sensor sensitivity and temperature settings.
• SmartLink™ network compatible.
An ISO 9000-2000 Company
SIGNALING
SmartStart™ and SmartLink™ are trademarks of Honeywell International Inc.
S521
FM _MEA
City of
APPROVED Approved
Chicago
132-95-E 7165-1288:144 Approved
7170-1288:146 High Rise
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: [phone] • Fax: [phone]
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2007 Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
CS-2005 Rev. A page 1 of 4