CZM-SS Datasheet, PDF (1/4 Pages) Gamewell-FCI by Honeywell – Six-Zone Addressable Interface Module

CZM-SS
Six-Zone Addressable Interface Module
Description
Gamewell’s CZM-SS SmartScan^TM
six-zone interface module pro-
vides an interface between the in-
telligent alarm system and a two-
wire conventional detection zone. A
common SLC input is used for all
modules, and the initiating device
circuits share a common external
supervisory supply and ground. Oth-
erwise, each module operates inde-
pendently from the others.
The first module is addressed from
01 to 94 while the remaining mod-
ules are automatically assigned to
the next five higher addresses. Pro-
visions are included for disabling a
maximum of two unused modules.
All two-wire detectors being moni-
tored must be two-wire UL compat-
ibility listed with the modules. The
CZM-SS transmits the status of a zone of two-wire detectors to the fire alarm
control panel. Status conditions are reported as normal, open, or alarm. The inter-
face module supervises the zone of detectors and the connection of the external
power supply.
Each CZM-SS module has panel-controlled bicolor LED indicators. The panel can
cause the LEDs to blink, latch on, or latch off.
Product Line Information
CZM-SS: Six-zone conventional-detector interface module.
BB-XP: Optional cabinet for one or two modules. Dimensions, DOOR: 9.234"
(23.454 cm) wide (9.484" [24.089 cm] including hinges), x 12.218" (31.0337 cm)
high, x 0.672" (1.7068 cm) deep; BACKBOX: 9.0" (22.860 cm) wide (9.25" [23.495
cm] including hinges), x 12.0" (30.480 cm) high x 2.75" (6.985 cm); CHASSIS
(installed): 7.150" (18.161 cm) wide overall x 7.312" (18.5725 cm) high interior
overall x 2.156" (5.4762 cm) deep overall.
BB-25: Optional cabinet for up to six modules mounted on CHS-6 chassis (below).
Dimensions, DOOR: 24.0" (60.96 cm) wide x 12.632" (32.0852 cm) high, x 1.25"
(3.175 cm) deep, hinged at bottom; BACKBOX: 24.0" (60.96 cm) wide x 12.550"
(31.877 cm) high x 5.218" (13.2537 cm) deep.
CHS-6: Chassis, mounts up to six modules in a BB-25 cabinet.
Features
• Six addressable Class B or three
addressable Class A initiating
device circuits.
• Removable 12 AWG (3.1 mm²) to
18 AWG (0.78 mm²) plug-in
terminal blocks.
• Status indicators for each point.
• Unused addresses may be
disabled.
• Rotary address switches.
• Compatible with Gamewell’s 602,
610, 632, 654 and 658 FACPs
with SmartScan™ SLC.
• Mount one or two modules in a
BB-XP cabinet (optional).
• Mount up to six modules on a
CHS-6 chassis in a BB-25
cabinet (optional).
• Mounting hardware included.
Listings
Listings and approvals below
apply to the CZM-SS Six-Zone
Addressable Interface Module. In
some cases, the module may not
be listed by certain approval
agencies, or listing may be in
process. Consult factory for
latest listing status.
• UL Listed: file S521.
• CSFM approved:
file 7300-1288:169.
• MEA approved:
file 368-01-E Vol.II.
CZM-SS CS-2470 09/01/06
Page 1 of 4