English
Language : 

1100-0505 Datasheet, PDF (1/1 Pages) Gamewell-FCI by Honeywell – Network graphic annunciator
NGA
Description
NGA Network Graphic Annunciator
The NGA LCD Graphic Annunciator is a powerful, yet
attractive component of the Gamewell-FCI emergency
voice evacuation systems. The bright, back-lit ¼” VGA
display is supplemented with an intuitive, easy-to-use
touch-screen interface that provides the following features:
• Up to 512 user-defined messages may be configured.
• Messages may be up to 77 characters in length.
• Display font and color may be selected for each
message.
The NGA mounts in NetSOLO® and E3 Series® enclosures
or it can be remotely located. It occupies one (1), standard
slot in the cabinet and directly connects to the INI-VGC or
RPT-E3 eliminating the need for a separate ARCNET inter-
face. The NGA occupies one node on the Broadband net-
work.
The back-lit LCD display indicates events stored in the sys-
tem event log, the status of analog addressable monitor
and control points and provides diagnostic fault codes/
messages.
The attractive, state-of-the-art display is user-friendly,
easy-to-read and affords the end-user with the means to
perform numerous functions via the touch-screen feature
which is software programmable. Some switch functions
are: Acknowledge, Signal Silence, Reset, Log Events, and
system maintenance functions.
Additional LEDs located on the display panel perimeter
indicate Power On, Alarm, System Trouble, Supervisory
and Ground Fault conditions.
NGA
Features
• Listed under UL Standard 864, 9th Edition
• 1/4” VGA display multipurpose touchscreen provides
the following options:
- Up to 512 user-defined messages may be configured
- Messages can be up to 77 characters in length
- Display font and color may be selected for each
message
• Software programmable touch-screen interface
• Mounts in NetSOLO® and E3 Series® command
center mounting spaces or enclosures
• 625K baud ARCNET communications
• User-friendly design
• RS-232 interface
Specifications
Ordering Information
Operating Voltage:
24 VDC from PM-9 power supply
Operating Current:
0.200 amp.*
Alarm Current:
0.200 amp.
Operating Temperature: 32° to 120° F (0° to 49° C)
Relative Humidity:
0-93% non-condensing at
90° F (32° C)
*Normal operating current. During power failure, current
drops to 0.045 amp, since the back light is extinguished.
E3 Series® and NetSOLO® are registered trademarks of Honeywell International Inc.
Model
1100-0505
Description
Network graphic annunciator
An ISO 9000-2000 Company
SIGNALING
S1869
FM MEA
City of
Chicago City of
APPROVED Approved
Approved Denver
3025415 231-06-E 7165-0694:268
Class 1
Class 2
Approved
7165-0694:269 High Rise
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2007 by Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
9020-0598 Rev. i1 page 1 of 1