MB86616 Datasheet, PDF (8/63 Pages) Fujitsu Component Limited. – IEEE1394-SCSI Tailgate

MB86616
(Continued)
Signal name
LINKON
TESTP,
TEST1 to TEST6
N.C.
I/O
Function
Output pin for detection of Link-on packet reception.
This pin outputs the “H” level signal upon reception of the Link-on packet
O
during operation with power supplies through the IEEE 1394 cable. The out-
put signal level changes to “L” the moment the PMODE signal becomes “H”.
The output from this pin remains unchanged with PMODE = “H”.
Leave this pin open when not in use.
O
Test pin. Leave it open.

Leave this pin open.
6. Power/GND Pins
Signal name
I/O
VDD3

VSS

SVDD5

SVSS

AVDD

AVSS

Function
3.3 V digital power supply pin
Digital ground pin
5 V power supply pin for SCSI I/O
Ground pin for SCSI I/O
3.3 V analog power supply pin
Analog ground pin
8