MB90495G Datasheet, PDF (65/92 Pages) Fujitsu Component Limited. – 16-bit Proprietary Microcontroller CMOS

MB90495G Series
2. Recommended Operating Conditions
Parameter
Symbol
Min
Value
Typ
Unit
Max
(VSS = AVSS = 0.0 V)
Remarks
4.5
5.0
5.5
V
During normal operation,
TA = −40 °C to +105 °C
Power supply voltage
VCC,
AVCC
4.75
5.0
5.25
V
During normal operation,
+105 °C < TA ≤ +125 °C
3.0

5.5
V Maintaining stop operation state
Smoothing capacitor
CS
0.022
0.1
1.0
µF *1
−40
Operating temperature
TA
−40

+105
°C

+125
°C *2
*1 : Use a ceramic capacitor, or one with approximately the same frequency characteristics. The bypass capacitor
of the VCC pin should have a greater capacity than CS.
See the figure below for details about connecting a smooth capacitor to the CS.
*2 : If used exceeding TA = +105 °C, be sure to contact us for reliability limitations.
• C Pin Connection Diagram
C
CS
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
65