MB3782 Datasheet, PDF (6/28 Pages) Fujitsu Component Limited. – Switching Regulator Controller

MB3782
It is also possible to use the DTC terminal to provide a soft start function.
7. Output Transistor
The output is open-collector type, with the emitter of the output transistor connected to the GND pin. The power
transistor for external switching can carry a base current of up to 50 mA.
8. Power Supply Control
Power supply on/off control is enabled through the CTL pin (pin 19). (In standby mode, power supply current is
10 µA or less.)
6