MB39A105 Datasheet, PDF (5/27 Pages) Fujitsu Component Limited. – 1-ch DC/DC Converter IC for low voltage

MB39A105
s ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Condition
Rating
Unit
Min
Max
Power supply voltage
VCC VCC terminal

7
V
Output current
IO
OUT terminal

35
mA
Output peak current
IOP
Duty ≤ 5% (t = 1/fOSC×Duty)

700
mA
Power dissipation
PD Ta ≤ +25 °C

490*
mW
Storage temperature
TSTG

−55
+125
°C
* : The packages are mounted on the epoxy board (10 cm × 10 cm).
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Condition
Power supply voltage
Input voltage
SCPOD terminal output voltage
SCPOD terminal output current
Output current
Oscillation frequency
Timing resistor
Short-circuit detection capacitor
Operating ambient temperature
VCC
VINE
VSCPOD
ISCPOT
IO
fosc
RT
CSCP
Ta
VCC terminal
−INE terminal
SCPOD terminal
SCPOD terminal
OUT terminal

RT terminal
CSCP terminal

Value
Unit
Min
Typ
Max
1.8

6
V
0

VCC − 0.9 V
0

6
V
0

2
mA
−30

+30
mA
100
500
1000 kHz
3.3
7.5
33
kΩ

0.22
1.0
µF
−30
+25
+85
°C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
5