MB3763 Datasheet, PDF (5/11 Pages) Fujitsu Component Limited. – Bidirectional Motor Driver

MB3763
s FUNCTIONAL DESCRIPTIONS
FORWARD/REVERSE MODE (MODE B& C)
In this mode, the transistor pairs Q2-Q3 and Q1-Q4 work alternatively, changing the output current direction.
When the mode B is selected, Q2 and Q3 are active and Q1 and Q4 are inactive. Therefore A-OUT is at low
level and B-OUT is at high level, with the current flowing from B-OUT to A-OUT through the motor. On the other
hand, when the mode C is selected, the current flows in the reverse direction.
BRAKE/STOP MODE (MODE A)
When the mode A is selected, Q1 and Q3 are inactive and Q2 and Q4 are active. A-OUT and B-OUT are stuck
at low-level; terminals of motor are shorted and the motor is forced to stop.
STANDBY MODE (MODE D)
In this mode, all transistors are inactive and the current through the motor does not flow. When the power supply
voltage is applied to A-VCC and B-VCC, the supply current is still less than or equal to 1 mA.
s CONTROL MODE
Control Block Diagram
A-IN
B-IN
A-VCC
Q1
A-OUT
Q2
Control
Logic
B-VCC
Q3
B-OUT
Q4
GND
Mode
A
B
C
D
Notes: 1: ≥ 2.4V
0: ≤ 0.4V
Input mode
A-IN
B-IN
1
1
1
0
0
1
0
0
Output mode
A-OUT
B-OUT
L
L
L
H
H
L
—
—
Operation
short (Brake)
Forward
Reverse
Open (Standby)
5