MB15E06 Datasheet, PDF (5/23 Pages) Fujitsu Component Limited. – Single Serial Input PLL Frequency Synthesizer On-Chip 2.5 GHz Prescaler

MB15E06
s ABSOLUTE MAXIMUM RAGINGS
Parameter
Symbol
Rating
Min.
Max.
Unit
Remark
Power supply voltage
VCC
−0.5
+4.0
V
VP
VCC
+6.0
V
Output voltage
VO
−0.5
VCC +0.5
V
Input voltage
VI
−0.5
VCC +0.5
V
Output current
IO
−10
+10
mA
Open drain withstand voltage
VOOP
−0.5
+7.0
V
Storage temperature
Tstg
−55
+125
°C
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Min.
Value
Typ.
Max.
Unit
Remark
Power supply voltage
VCC
2.7
3.0
3.6
V
VP
VCC

6.0
V
Input voltage
VI
GND

VCC
V
Operating temperature
Ta
−40

+85
°C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
5